Best DCC sound Decoder for a Bachman Doodlebug

[C&O Fan]

rs2mike

Sounds plenty loud to me

Yeah on it's own it's ok but compared to all my other sound locos it's pretty quiet

I probably run all my locos too loud i have to remind myself to think small sound wise also

 

[rs2mike]

Sounds plenty loud to me

[C&O Fan]

srrman

Im installing a QSI Titan A in a friends doodle bug. Sets on top the motor with some double sided kapton tape.All wireing is done, everything fits well and sounds good.

I was going to try one but was put off by all the bad stuff posted on the qsi yahoo group

 

would love to see a video of it to hear the sound

 

[srrman]

Im installing a QSI Titan A in a friends doodle bug. Sets on top the motor with some double sided kapton tape.All wireing is done, everything fits well and sounds good.

[Lake]

Thanks for the video! The lighting gave it a late evening feel.

[C&O Fan]

Heres a short Video

http://www.youtube.com/watch?v=8TLqzaY4ba8&feature=youtu.be

 

sorry for the poor lighting

[C&O Fan]

Thanks Rich

I did a google search for this conversion

and found this

http://www.railroad-line.com/forum/topic.asp?TOPIC_ID=33117

 

and of course a link here on this forum

http://cs.trains.com/mrr/f/744/p/187832/2052738.aspx

 

I hard wired my decoder to avoid the misswired bachmann socket and give more room for the decoder

 

and used a 14 volt bulb to replace the LED

 

it's  all working very well now but still lacks just a little volume

 

i posted to the  Bachman board but got no help there 

[richg1998]

Very nice. Love to see someone post results for the MRR community. I bet some in the Bachmann forums would like to see this. I have seen this question there.

Rich

[C&O Fan]

A couple photos showin the bottom speaker mount

 

[C&O Fan]

The small speaker was very poor volume so i added a  retangle speaker under the frame

inside an wood box with a black fabric cover to make it look like a tool or storage box

in this photo it's taped in place for temporary testing

[C&O Fan]

Here's a photo of the decoder and you can see the very small speaker less than dime size

so I'm going with a larger rectangle speaker

 

Hoping to mount it underneath the frame and make it look like a storage box

 

 

 

[C&O Fan]

After some research i found out that the post office required the C&O to convert their gas doodlebugs to diesel because of the fire hazard

so i chose an N scale sound decoder with the RDC sound file added

for its small size

http://www.digitrax.com/products/sound-decoders/sdn144ps/

 

I'm thinking of mounting a speaker on the outside bottom

but would love to find a how to article to see what others have done

 

[C&O Fan]

Guess i need to do some research as to weither the C&O used Deisel if so then an RDC Budd car decoder should work

 

[richg1998]

The Best will be what you like best.

Some use a ESU LokSound. Some use a SoundTraxx Tsunami. Both sites have sound samples.

There may be a couple more different brands of decoders with a usable sound decoder.

Some roads used a diesel sound as some of these locos where converted from the Winton Distillate Engine to diesel power.

Rich

[C&O Fan]

I'm looking for the best DCC sound Decoder for a Bachman Doodlebug

to convert my DC version

 

Has anyone here done this conversion ?

Thanks