Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

How to fix this?

2316 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2006
  • From: 4610 Metre's North of the Fortyninth on the left coast of Canada
  • 9,352 posts
How to fix this?
Posted by BATMAN on Tuesday, May 8, 2012 3:36 PM

I got this "G Scale" Christmas train at a garage sale for $25.00. It runs great including a smoking chimney that we discovered as it was running around the eight foot oval on the living room floor last night. The whistle doesn't sound and further investigation showed this wire pulled out of the plug. I am thinking of pushing it back in as there are no visible broken bits in the plug, it appears to have just pulled out. So should I just push it in and add some glue to hold it or is there another way to proceed? I would like to solder it but that would melt the plastic plug.  As you can see the plug is quite large being "G Scale".

I was going to ask over on the "G Scale" forum but I thought we HO-ers and "N Scalers" should be able to handle something like this.Laugh

As always thanks.

BrentCowboy

Brent

"All of the world's problems are the result of the difference between how we think and how the world works."

  • Member since
    January 2007
  • From: Eastern Shore Virginia
  • 3,290 posts
Posted by gandydancer19 on Tuesday, May 8, 2012 3:55 PM

You should be able to remove the metal pin that is in the plug.  There is a 'stop' somewhere that you should be able to push down, on the metal pin, then push the pin back out.  Now you can resolder the wire on the pin and push it all back in the plug.  Just take your time.

Elmer.

The above is my opinion, from an active and experienced Model Railroader in N scale and HO since 1961.

(Modeling Freelance, Eastern US, HO scale, in 1962, with NCE DCC for locomotive control and a stand alone LocoNet for block detection and signals.) http://waynes-trains.com/ at home, and N scale at the Club.

  • Member since
    July 2006
  • From: 4610 Metre's North of the Fortyninth on the left coast of Canada
  • 9,352 posts
Posted by BATMAN on Tuesday, May 8, 2012 4:56 PM

Thanks Elmer!

I got the pin out and soldered it to the wire. I am having trouble getting the pin back in. There is no solder in the way, I think I did a pretty neat and tidy job soldering. Is there a trick in getting the pin back in?

BrentCowboy

Brent

"All of the world's problems are the result of the difference between how we think and how the world works."

  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Tuesday, May 8, 2012 5:20 PM

 It has to be lined up the right way, so the tab can snap back in the shell at the openign there shown on the first pic - that's what holds the pin in place as you plug it in tot he other end of the connection. That's what was wrong with my first PCM T-1, one of the pins was in the shell backwards, so when the connector got plugged in, instead of makign contact it just shoved the pin out, thus no pickup from one side of the tender.

Assuming you didn't get solder on the outside as you say, and didn;t otherwise crush the pin by clamping ti too tight while soldering the wire back, it should just push back in. The larger size connectors might take a bit of force, but ti should push in. If it goes most of the way, a small screwdrive cna push on the pin, just don;t slip off and slice the wire or you get to do it all over again. There is a special tool for those types of conenctors, but it is generally used for extraction of the pins. Larger ones like that usually a small screwdriver pressed in the side tab will release it.

                                     --Randy


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    July 2006
  • From: 4610 Metre's North of the Fortyninth on the left coast of Canada
  • 9,352 posts
Posted by BATMAN on Tuesday, May 8, 2012 9:02 PM

Thanks Elmer and Randy.

The lights are lit, the chuff is chuffing and the whistle is blowing. Learning that those pins can come out of the plugs and how to do it was great. Any day you learn something new is a good day. Thanks again.Smile

BrentCowboy

Brent

"All of the world's problems are the result of the difference between how we think and how the world works."

  • Member since
    January 2007
  • From: Eastern Shore Virginia
  • 3,290 posts
Posted by gandydancer19 on Wednesday, May 9, 2012 9:55 AM

Glad to be of help.  Enjoy.

Elmer.

The above is my opinion, from an active and experienced Model Railroader in N scale and HO since 1961.

(Modeling Freelance, Eastern US, HO scale, in 1962, with NCE DCC for locomotive control and a stand alone LocoNet for block detection and signals.) http://waynes-trains.com/ at home, and N scale at the Club.

  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Wednesday, May 9, 2012 4:59 PM

 That looks like a better quality one, but when my oldest son was 3 I got him a Lionel large scale Thomas set, and ONCE I forgot to unplug the power pack and it literally melted. There was no short, the train wasn't running, the speed control was in the stop position - it just overheated and melted, and I was just lucky it didn't set the carpet on fire. I ended up having to use my Tech II 1500 to run it. I never saw such a junky power pack, even in a train set, before. Yours looks a lot nicer, so you shouldn;t have a problem. Just remember to unplug it.

 This is why my entire train room is powered by a pair of X10 modules - one turns off the layout, one turns off the workbench. NOTHING powered or even connected to the power, other than through open switch contacts, when I'm not there.

                 --Randy


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    July 2006
  • From: 4610 Metre's North of the Fortyninth on the left coast of Canada
  • 9,352 posts
Posted by BATMAN on Wednesday, May 9, 2012 5:54 PM

It runs very smooth and I am somewhat impressed by the overall quality. The power pack does get quite warm even when in the stop position. I have a box of power packs in the train room so I will use one of these if I haul it out at Christmas.

The kids want it to go on the table at Christmas Dinner. We have a special extra large table we use at Christmas because we usually get about 20 in for Christmas Dinner. Even the wife said it would fit. I couldn't believe my ears when I heard her say that. My daughter said the gravy can go on the flat car and the Turkey Legs can be delivered in the Gondola. Sounds perfect for this train lovin Turkey carver.Laugh

BrentCowboy

Brent

"All of the world's problems are the result of the difference between how we think and how the world works."

  • Member since
    May 2012
  • From: mississippi
  • 291 posts
Posted by sakel on Wednesday, May 16, 2012 11:52 AM

i think lionel made a promo about that in 1950-something. Lets just say it did not end well. ;)

Samuel A. Kelly

I can draw pictures with my keyboard!

-------- ( It's a worm)

  • Member since
    February 2008
  • 8,879 posts
Posted by maxman on Wednesday, May 16, 2012 2:57 PM

sakel

i think lionel made a promo about that in 1950-something. Lets just say it did not end well. ;)

..........at least not for the turkey.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!