Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Repurposing a power supply

1418 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2015
  • From: Ludington, MI
  • 1,860 posts
Repurposing a power supply
Posted by Water Level Route on Wednesday, August 31, 2022 5:46 AM

I have access to an old power supply from a battery charging system that I'm curious if I can use to power accessories (lighting mainly).  Are there any "gotcha" type things I need to be on the lookout for?  The adapter says it outputs 12 volts at 3 amps.  I do not believe it has any of the brains of the charging system in it as it clearly says AC adapter on the case.  Go ahead and use, or more details needed?

Thanks!

Mike

  • Member since
    March 2011
  • 1,950 posts
Posted by NVSRR on Wednesday, August 31, 2022 6:00 AM

If it is for lighting only.  And is only a power source, I don't see why that wouldn't work as long as you don't go beyond the 3 amp draw.  Don't forget fuses, and on/off switches in the   circut. 

that is actually a good idea for lighting.  Cuts back on the wiring from a central point.  

shane

A pessimist sees a dark tunnel

An optimist sees the light at the end of the tunnel

A realist sees a frieght train

An engineer sees three idiots standing on the tracks stairing blankly in space

  • Member since
    July 2009
  • From: lavale, md
  • 4,678 posts
Posted by gregc on Wednesday, August 31, 2022 6:01 AM

absolutely reuse an old wall wart.

but if you're looking for DC, make sure it says 12V DC

greg - Philadelphia & Reading / Reading

  • Member since
    February 2015
  • From: Ludington, MI
  • 1,860 posts
Posted by Water Level Route on Wednesday, August 31, 2022 8:43 AM

Thanks guys.  It has the DC symbol on it in the output description (long line over dashed lines).

I'm assuming I don't need to look for anything else, like filtered or regulated, or goodness knows what?  

I appreciate the help.

Mike

  • Member since
    July 2009
  • From: lavale, md
  • 4,678 posts
Posted by gregc on Wednesday, August 31, 2022 9:56 AM

i'm in the process or wiring up some signals.   i'm tapping into a nearby 12V DC supply, measures 13+ V.   but the signal LEDs are bright and the small circuit i added to control them uses a 3 terminal regulator to drop the voltage.  it was easy to replace an 8V regulator with a 5V.

so even if your supply isn't regulated, you can easily add a regulator 

greg - Philadelphia & Reading / Reading

  • Member since
    December 2016
  • 168 posts
Posted by speedybee on Wednesday, August 31, 2022 2:13 PM

If you're keeping the plug part as opposed to cutting it off, it wouldn't hurt to confirm whether the plug is centre positive or negative before plugging it into stuff. Most are centre positive, but centre negative supplies do exist.

The picture on the power supply should tell you whether it's centre positive or negative... Or just stick a voltmeter on it

  • Member since
    July 2006
  • From: 4610 Metre's North of the Fortyninth on the left coast of Canada
  • 9,352 posts
Posted by BATMAN on Wednesday, August 31, 2022 2:55 PM

I use these with old wall warts. I bought a bunch from China for $2.00ea, they were here in 11 days.

Brent

"All of the world's problems are the result of the difference between how we think and how the world works."

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!