I project idea of mine I wish to do once I get my model railroading skills up to pare is to create my own fleet/roster/series of Canadian National Heritage units using HO scale Tier 4 ET44ACs made by ScaleTrains in the modern CN scheme by painting over them and creating my own custom decals for it in Affinity designer, a graphic design program. However I need to know if its possble to reprogram the original units number it was given to a new one. I will explain. One example of a heritage unit, is a CN ET44AC in the 1954 green, black and yellow livery that CN introduced on their passanger GMD FP9A diesel units with their bulldog style nose hood. I learned that in CNs roster of ET44Acs there is one such unit numbered #3054. 1954 was then the livery was introduced, so that will serve as a clue as to the year this livery was started in. Plus it looks offical and thats its in the actual CN roaster list.
However would it be possible to renumber the locomotives road number/address to the number I despire? If not I could just stick a label on the bottom of the fuel tank of what the actual number painted over was or have a list do I dont forget when track programing it.
So, what do you think and is it possible?
The basics of ESU decoders are the same as any other decoder, so if you have a way currently to change CVs, like engine address, top speed, momentum etc. it will work with the LokSound decoder too.
The only thing you can't do without the LokProgrammer is change the sounds the decoder produces - you can change the volume of individual sounds, or change the horn/whistle and bell type using CVs, but you can't reprogram say a decoder loaded with diesel sound files into one with steam sounds, or change say a decoder loaded with an Alco diesel sound file package into a GE one.
Yes.
My Scaletrains locos out of the box use address 3 on the decoder.
I changed my decoders to use the locos 4 digit number eg; from address 3 to address 3093.
How you do this will depend on your DCC system.
I use Lenz and its a simple matter of putting the loco on a programming track and using the propmpts on the handheld control to get to the address screen and then typing in the new number.
Trevor
I understand him to be asking 'if you change the engine number can you reprogram the decoder to use the 'new' number as the address?' I am no authority on LokPilot, but it seems pretty clear from the manual that if you set bit 5 in CV29 to 'long addressing' you can put anything in CV 18 and 19 that fits and the system will address it by that number. Note that there were restrictions on how high a number you can use AND on numbers 127 or lower, but neither of those should concern typical CN locomotive numbering. More to the point I don't see why changing any of these CVs would affect or delete any other settings on the decoder or require it to be wiped like an iPhone to allow its 'ownership' to be changed.
Changing the road number is the one thing that everybody does. I'll bet every current decoder produced by ESU, Soundtrax, TCS, Digitrax and NCE allows you to change the number.A Kalmbach book on DCC may be helpful for you because there is much about DCC that is not intuitive. Whatever DCC system you have or may get, you will need to put a hold on your Man Card and read the manual.
Henry
COB Potomac & Northern
Shenandoah Valley
BigDaddy Whatever DCC system you have or may get, you will need to put a hold on your Man Card and read the manual.
Whatever DCC system you have or may get, you will need to put a hold on your Man Card and read the manual.
BigDaddy Changing the road number is the one thing that everybody does. I'll bet every current decoder produced by ESU, Soundtrax, TCS, Digitrax and NCE allows you to change the number.A Kalmbach book on DCC may be helpful for you because there is much about DCC that is not intuitive. Whatever DCC system you have or may get, you will need to put a hold on your Man Card and read the manual.
RTFM.(Read The Manual)
Disclaimer: This post may contain humor, sarcasm, and/or flatulence.
Michael Mornard
Bringing the North Woods to South Dakota!
I don't think there is ANY DCC decoder sold today, or ever, that didn't allow the address to be changed. It kind of defeats the purpose of independent train control if all the locos have to have the same address.
Notice I said DCC decoder. MTH is NOT DCC, it just (mostly) works on DCC. They tend to be limted to using either default address 3 or the cab number of the loco with DCC - however, the DCC address can be changed if you know someone with a DCS system to do it for you.
The PowerCab will have no problem changing the address. If you already set it to the cab number it came lettered for, the process is exactly the same, just key in whatever number you want.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
Bayfield Transfer Railway RTFM.(Read The Manual)
Bayfield Transfer RailwayRTFM.
Unix geeks are so last-century.
The advice is succinctly correct but in this modern age it's advisable to link the FMs:
A bunch of NCE PowerCab stuff (I don't know what version he has):
https://ncedcc.zendesk.com/hc/en-us/articles/201565799-Power-Cab-Manuals?mobile_site=true
A version of the LokPilot manual to give him some insight into what LokSound decoders are designed to have:
http://www.esu.eu/uploads/tx_esudownloads/51982_LokPilot_V40_Family_ESUKG_EN_User-manual_Edition_3_eBook.pdf
All y'all with better material and sources, tell him where to find what he'll benefit from without having to learn obsolescence and take wrong steps.
If he doesn't have a 1.65B, he should upgrade to one. The B manual is just an addendum, the 1.65 manual is more useful.
" My Scaletrains locos out of the box use address 3 on the decoder. "
And this is a pretty much standard across the industry, address 3 at delivery. SO will need to learn how to change the address at some point.
Right from the NCE web site :
https://ncedcc.zendesk.com/hc/en-us/articles/360001082573-Super-Easy-Programming-on-the-Main-POM-
Marc
NOTE to site moderator: The publicity popping up across bottom of page is a PITA. About as annoying as the female garment pubs showing up on left hand side.
Overmod Unix geeks are so last-century.
I have no idea what that means... I must be last century also...
I get the impression from this OP that he is just dreaming.
Cid (Memphis, Tennessee)
Random_Idea_Poster_6263 Bayfield Transfer Railway RTFM.(Read The Manual) Thanks I will be sure to do that. Dont worry I am starting to like sarcasm. I understand what your saying
Thanks I will be sure to do that. Dont worry I am starting to like sarcasm. I understand what your saying
Then perhaps this will amuse you:
RTFMA - Read the manual SIR
Just funnin' with ya
UNIX? Try OS/360
Thanks Overmod I will take a look at these.
I installed ESU 53614 [non sound] decoders in 3 of my locos (Rivarossi U25c and 2 Bowser c430's).
Procedure:
Put loco on track. Go to programming screen on my tablet running Roco z21. Tap the "read number" button. "3" (the default) is displayed. Type in the desired 4-digit number in its place. Touch the program button. Done.
This page intentionally left blank
Not sure what Roco instructions have to do with it, the OP indicated he has a PowerCab. But the basic steps are the same for all DCC systems.