Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Slow running trains

1943 views
14 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2010
  • 1 posts
Slow running trains
Posted by Frosty58 on Tuesday, January 14, 2020 7:54 AM

Hello Everyone,

I'm running a NCE DCC PowerCab system on +600' HO track. I have 28 steps set, the track has been cleaned with consistant voltage across the entire layout. But all of my engines appear to be running slow almost at half-speed.

Any direction or ideas are greatly appreciated.

Thank you

Dave

  • Member since
    May 2010
  • From: SE. WI.
  • 8,253 posts
Posted by mbinsewi on Tuesday, January 14, 2020 8:09 AM

Welcome to the forums.

600' of track?  That must be one huge layout.  That's all I got.  

There are many on here that use the NCE PowerCab.  I'm sure they will chime.

600' ?  Are there boosters involved?

Mike.

  • Member since
    June 2014
  • From: East Central Florida
  • 480 posts
Posted by Onewolf on Tuesday, January 14, 2020 8:23 AM

What is the track voltage set to?  and measured?  Do you have an RRampMeter?

Modeling an HO gauge freelance version of the Union Pacific Oregon Short Line and the Utah Railway around 1957 in a world where Pirates from the Great Salt Lake founded Ogden, UT.

- Photo album of layout construction -

  • Member since
    June 2007
  • 8,892 posts
Posted by riogrande5761 on Tuesday, January 14, 2020 8:37 AM

Onewolf

What is the track voltage set to?  and measured?  Do you have an RRampMeter? 

Where is a good place to buy RRamp meter, best price?

Rio Grande.  The Action Road  - Focus 1977-1983

  • Member since
    December 2012
  • 157 posts
Posted by Redvdub1 on Tuesday, January 14, 2020 9:12 AM

Only once in a blue moon can you beat the list price for a rampmeter.  

  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Tuesday, January 14, 2020 9:44 AM

 All you need is the cheap Harbor Freight meter. It gives accurate results for DCC voltage because it doesn't include any sort of RMS compensation, which is good, because the peak and RMS for a square wave are the same. Or some other equally cheap meter, though often the same one HF gives away or charges no more than $2 for with coupon is sold for $15-$20 elsewhere.

 600' of track - yeah, that's a good size layout, nearly 10 scale miles. Is there a heavy bus, and how long is it? Seems unlikely that the bus run wouldn;t exceed 30 feet in each direction with that much track, so there will be voltage loss even with #12 wire. This is perhaps an example of a layout that needs boosters not because of how many trains are being run, but because of how big it is.

                                         --Randy

 


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    January 2019
  • 21 posts
Posted by dry_heat on Tuesday, January 14, 2020 12:25 PM

Your voltage may be consistent with no load, but once you put a loco on it, at some distance from the source, it's going to drop, especially if that distance is 300 feet.

  • Member since
    February 2002
  • From: Mpls/St.Paul
  • 13,892 posts
Posted by wjstix on Tuesday, January 14, 2020 4:11 PM

Do the trains all run slow over the entire layout, or are they faster in places? If so, that might mean the track farther from the power source isn't getting enough power due to the resistance in the wire. On a large layout, you might find you have to add one or two boosters to even out the power.

Stix
sol
  • Member since
    January 2007
  • 34 posts
Posted by sol on Tuesday, January 14, 2020 4:51 PM
At first I thought your controller may have been set to Yard mode which normally is slower but that only works in Procab mode, not PowerCab mode. As others have said, constant voltage without a load is not a true indication. Add a loco at the further-est distance from the power input and check voltage where the loco is situated. A standard AC meter will give you a reasonable reading between no load and a load.
  • Member since
    July 2006
  • From: Central Vermont
  • 4,565 posts
Posted by cowman on Tuesday, January 14, 2020 4:57 PM

Welcome to the forums.  Since you are new your posts will be monitored for a short while, so it may take some time for them to show up.  Hang in there.

How many feeders do you have?  How far apart?

Good luck,

Richard

  • Member since
    September 2004
  • From: Dearborn Station
  • 24,281 posts
Posted by richhotrain on Tuesday, January 14, 2020 5:37 PM

We need to hear back from the OP with more information about this layout.

With 600+ feet of track, is this a new layout or has it been operating for awhile?

How long have locomotives been running at half speed?

The layout could need a second booster, or heavier gauge bus, or more feeders.

I have a Pro Cab, not a Power Cab, so I don't know the answer, but can a Power Cab support a layout of this size? How many running locomotives can a Power Cab handle, and how many locomotives is the OP running at one time? If only one or two locomotives are running on the layout, do they still just run at half speed?

Rich

Alton Junction

  • Member since
    December 2015
  • From: Shenandoah Valley
  • 9,094 posts
Posted by BigDaddy on Tuesday, January 14, 2020 5:50 PM

rrinker
This is perhaps an example of a layout that needs boosters not because of how many trains are being run, but because of how big it is.

Since you are new, you don't know the players, but believe Randy over me when it comes to 'lectricity.   This is the biggest layout I remember running just a Powercab in the 4 years I've been in the forum.  

However a 600' layout didn't just happen overnight.  Did they used to run normally?  Did something change with the layout?

Henry

COB Potomac & Northern

Shenandoah Valley

  • Member since
    October 2006
  • From: Western, MA
  • 8,571 posts
Posted by richg1998 on Tuesday, January 14, 2020 6:43 PM

My Power Cab always showed 13.6 vac at the terminals with a Harbor Freight meter with one loco on the rails.. I have four of the meters.

with the below circuit on the 20ma DC scale, it makes a good amp meter but the Power Cab has it's own amp meter. If you go for more power like our club did, it will help. It worked very well. Two three terminal devices do the conversion. This guy test all his circuits first.

http://www.circuitous.ca/DCCammeter10.html

Rich

If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.

  • Member since
    March 2012
  • 1,162 posts
Posted by PC101 on Friday, January 17, 2020 7:42 PM

Here is where my post disappeared last night (1/16/20). I'll EDIT this post and retype it here sometine later.

  • Member since
    May 2010
  • From: SE. WI.
  • 8,253 posts
Posted by mbinsewi on Friday, January 17, 2020 7:57 PM

PC101
Here is where my post disappeared last night (1/16/20). I'll EDIT this post and retype it here sometine later.

Yep, you'll have that in here, and don't expect anyone to explain it. 

Lots of mysteries seem to happen here that don't happen in other forums, without an explaination.

Mike.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!