Hi Guys,
I have just installed a Digitrax Decoder but the loco does seem to move. The lights seem to work but the loco does not move.
Question - Do I also need to cut the track on the PCB marked "X" . See link
I have already cut 3 "X"s on the adjoining PCB...
Any advice will be appreciated.
See my recent post, should be just two above this one..
Todd
You should post this in Model Railroader Forum. There is a section there specifically for electronics and DCC.
_____________
"A stranger's just a friend you ain't met yet." --- Dave Gardner
Details.
http://cs.trains.com/mrr/f/744.aspx
Rich
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.