BLI AC6000 equipped with QSI decoder(also with updated chip), want to disable strobing lights. What CV's do I need to change?
tomkat,
FWIW: You can download the QSI decoder manual from the BLI website. It's in .pdf format and would be worth having for reference.
That said, I found a reference for it on pg. 101 in the above link. It's CV 55.110.5 and the description states "This CV specifies the number of seconds the ditch lights remain strobing after a horn blast end". The range is 0-31; zero meaning off.
Since there are numbers after the main CV (i.e. "55"), it most likely means you'll need to set CV49 & CV50 to a particular value first before you can alter CV 55. Read the pages before pg. 101 and it should indicate which values you'll need to plug in for CVs 49 & 50.
Hope that helps...
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.