Peco scissors crossing wiring in DCC

[spearo]

Hi all,

 I am wondering if anyone can't point me in the right direction to find out how to wire a Peco scissors crossing for DCC.  I have been to WiringforDCC.com and the website covers crossings but not SCISSOR crossings (N scale).  I can't read an electric wiring schematic to save my life so I need a "....... for dummies" description.

 

Thanks

[blrrfan]

PLS DCC layout construction (*) favors using a auto-reverser

(btw., there is a picture of a scissor crossing, 2nd from top. 1 crossing, 4 switches, double-track)

 

(*) disclaimer ;)  I just run across them via internet search. I do not know them, neither commercially, nor privately

[blrrfan]

Well, if the double track is laid out like a dog-bone, this switch arrangement will create the same issue as with an balloon track (or wye)

[jrbernier]

  IIRC, the Peco double crossovers have insulated gaps already factory installed.  If you wind up with a 'dogbone' arrangement that will result in a 'reverse loop', then you will need to add gaps out in the reverse loop to provide an insulated section for an auto reverser to do it's job....

Jim

[spearo]

Thanks for the input all, I appreciate the effort.

The scissors track is not in a dogbone or double-reverse or anything like that.  I have a double track mainline around the outside edge of my layout.  The scissor crossing is simply put inbetween the two tracks to provide a cross-over point from one track to the other.