Jerry SP FOREVER http://photobucket.com/albums/f317/GAPPLEG/
You might try contacting Bachmann. Here is a link to the Bachmann site. They have a site to inquire about parts. I have used the site to buy new connectors for the HO 4-4-0.
http://www.bachmanntrains.com/home-usa/board/
Rich
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.
Jerry,
Unfortunately I don't think that board in the new 44 tonner will help you much with installing a decoder in an older two moter version. The wiring is very different because you have motor lead from both ends of the frame on the old version. There are a couple articles on wiring a decoder into the two motor version that show you have to do it. Not as simple as plugging into a socket and away you go, but not terribly difficult if you don't mind doing some soldering.
I managed to squeeze in a Z-scale Digitrax decoder into cab and retain the figure. Unfortunately I couldn't completely hide the docoder.
Scott Sonntag