Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Atlas S2

1365 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2006
  • 3 posts
Atlas S2
Posted by joecomet on Sunday, May 11, 2008 9:51 PM

 

Has anyone installed the new MRC decoder for the Atlas S2.  How hard is it and how does it perform.

comet/Tallahassee

 

  • Member since
    November 2002
  • From: Thornton, CO
  • 763 posts
Posted by jwils1 on Monday, May 12, 2008 9:16 AM

There have been several very negative reports about this decoder so I guess you are taking a gamble if you buy one.  However mine is working just fine and I've heard of others liking them very much.  So I'm not sure what to think about it except I'm glad I have one.

Motor control is excellent whereas this hasn't been the case on some earlier MRC decoders.  The sound is also good except not the correct Alco engine sound for this particular locomotive.  This seem so bother some but not me.

Installation is very easy, except that you have to mill the weights a little to allow it to fit.  I did this with a dremel tool without any difficulty.

I'm really glad that MRC came out with a decoder to specifically fit this loco.  David Bedard was kind enough to have previously given me advice on how to instal a Digitrax sound decoder in this loco but I kept putting it off because I wasn't sure I had the skill level to do it.  Then this one became available so I went for it.  I just hope it lasts longer than what some are saying.  So far so good.

   

Jerry

Rio Grande vs. Santa Fe.....the battle is over but the glory remains!

  • Member since
    June 2004
  • From: Orig: Tyler Texas. Lived in seven countries, now live in Sundown, Louisiana
  • 25,640 posts
Posted by jeffrey-wimberly on Monday, May 12, 2008 9:27 AM
Here's some free advice. Stay as far away as possible from MRC decoders. There's a reason why they're cheap. They don't work! Spend your money on another brand decoder. I prefer Digitrax.

Running Bear, Sundown, Louisiana
          Joined June, 2004

Dr. Frankendiesel aka Scott Running Bear
Space Mouse for president!
15 year veteran fire fighter
Collector of Apple //e's
Running Bear Enterprises
History Channel Club life member.
beatus homo qui invenit sapientiam


  • Member since
    May 2002
  • From: Massachusetts
  • 2,890 posts
Posted by Paul3 on Monday, May 12, 2008 12:26 PM

In a word: awful.

The Atlas S-unit decoder is just plain j-u-n-k.  I have personally seen a failure rate of over 50% (4 our of 7 have died) at my club.  They won't program or they will have sound an no motion.  They also have a recording of an Alco 244 V-12 engine (as in the RS-3) vs. the Alco 539 or 539T straight-6 engine that these units actually had.  Also, due to MRC's woefully-behind-the-times technology, you can't even read back what's on the decoder (something common on DCC decoders for over a decade).

If they work, if you can program them, and if they don't die on you, you can enjoy the mediocre sound of an RS-3 coming from your S-2 that has to be turned on every time there's a track short.

Paul A. Cutler III
************
Weather Or No Go New Haven
************

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!