Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
Prototype information for the modeler
»
Steam wrecking crane tenders
Steam wrecking crane tenders
4779 views
4 replies
Order Ascending
Order Descending
Anonymous
Member since
April 2003
305,205 posts
Steam wrecking crane tenders
Posted by
Anonymous
on Friday, August 15, 2003 3:33 AM
Was it "normal" for a steam crane like those used in wrecks to travel with a tender for water and fuel? I've seen many photos of "crane tenders" moving with steam cranes, but none seem capable of providing adequate water and fuel.
Can anyone provide a photo of such a movement?
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Steam wrecking crane tenders
Posted by
Anonymous
on Friday, August 15, 2003 3:33 AM
Was it "normal" for a steam crane like those used in wrecks to travel with a tender for water and fuel? I've seen many photos of "crane tenders" moving with steam cranes, but none seem capable of providing adequate water and fuel.
Can anyone provide a photo of such a movement?
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, August 20, 2003 5:23 PM
I was just on line last night ( 8-20 ) and it was on the web site of crestline, I believe that I saw just what you are asking about. I do not remember exactly where because I was looking for books and I was going everywhere.
However they showed one tender and stated that it would be replaced later with a better one. I do believe that there was mention of it being done as a common thing. I think that I saw it under a heading something / MOW.
ralph
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, August 20, 2003 5:23 PM
I was just on line last night ( 8-20 ) and it was on the web site of crestline, I believe that I saw just what you are asking about. I do not remember exactly where because I was looking for books and I was going everywhere.
However they showed one tender and stated that it would be replaced later with a better one. I do believe that there was mention of it being done as a common thing. I think that I saw it under a heading something / MOW.
ralph
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, August 20, 2003 8:48 PM
It's Ralph again.
I was back on line to crestline.pennsyrr.com. I found the picture of a tender hooked up to the derrick. For some reason, when I typed the above I would not get in. It said page could not be found. However, that is what the site kept giving for an address. If you use http://crestline.pennsyrr.com/wrecktender.jpg.html, it will open to the picture, don't leave off the jgp.html.
If you get in to the site, wander around in the photo gallery. There are some great pictures in there.
I have only been back into model railroading a short time, but it seems that railroad tenders were, like many other pieces of equipment owned by railroads, turned into other pieces of useable equipment whenever possible. Example: page 7 in a book titled "35 Modelbuilding Projects" by Walter Olevsky a tender is converted into a signal maintainers headquarters. They show a picture of an actual car as changed and picture of kitbashed car. I have seen pictures of tenders used in many different ways, just as they recycled passenger cars and boxcars they recycled tenders too.
Ralph
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, August 20, 2003 8:48 PM
It's Ralph again.
I was back on line to crestline.pennsyrr.com. I found the picture of a tender hooked up to the derrick. For some reason, when I typed the above I would not get in. It said page could not be found. However, that is what the site kept giving for an address. If you use http://crestline.pennsyrr.com/wrecktender.jpg.html, it will open to the picture, don't leave off the jgp.html.
If you get in to the site, wander around in the photo gallery. There are some great pictures in there.
I have only been back into model railroading a short time, but it seems that railroad tenders were, like many other pieces of equipment owned by railroads, turned into other pieces of useable equipment whenever possible. Example: page 7 in a book titled "35 Modelbuilding Projects" by Walter Olevsky a tender is converted into a signal maintainers headquarters. They show a picture of an actual car as changed and picture of kitbashed car. I have seen pictures of tenders used in many different ways, just as they recycled passenger cars and boxcars they recycled tenders too.
Ralph
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Thursday, August 21, 2003 1:23 AM
Thanks, everyone. That is EXACTLY what I needed!
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Thursday, August 21, 2003 1:23 AM
Thanks, everyone. That is EXACTLY what I needed!
Reply
Edit
coalminer3
Member since
January 2001
From: WV
1,251 posts
Posted by
coalminer3
on Wednesday, August 27, 2003 8:19 AM
Here's something else to think about. Trains in MOW service also had tenders. This was a common sight on the C&O for example. Cars were the usual collection of flat cars, gons, and boxcars; lots of times a car-mounted Burro crane (there's a project for someone to do!), and a locomotive tender (gotta get water somewhere)
Camp cars as they were called were generally converted WW2 troop sleepers, but I also remember many times seeing HW passenger cars as well. These were coaches, diners, etc. used to for office space, machinery and to carry the work crew. Put a locomotive on the front and a cab on the rear and get busy.
Practice on the L&N was also similar but most of the time they used converted boxcars in camp service. Nowadays, of course many roads use prefab units on cars.
BTW, I got a flyer in the mail from the C&O Historical Society the other day. They are selling locomotive tenders.
Hope this helps.
work safe
Reply
coalminer3
Member since
January 2001
From: WV
1,251 posts
Posted by
coalminer3
on Wednesday, August 27, 2003 8:19 AM
Here's something else to think about. Trains in MOW service also had tenders. This was a common sight on the C&O for example. Cars were the usual collection of flat cars, gons, and boxcars; lots of times a car-mounted Burro crane (there's a project for someone to do!), and a locomotive tender (gotta get water somewhere)
Camp cars as they were called were generally converted WW2 troop sleepers, but I also remember many times seeing HW passenger cars as well. These were coaches, diners, etc. used to for office space, machinery and to carry the work crew. Put a locomotive on the front and a cab on the rear and get busy.
Practice on the L&N was also similar but most of the time they used converted boxcars in camp service. Nowadays, of course many roads use prefab units on cars.
BTW, I got a flyer in the mail from the C&O Historical Society the other day. They are selling locomotive tenders.
Hope this helps.
work safe
Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up