My advice is, If you drive/walk past a cool looking building, vehicle, piece of rolling stock or a rock, don't say ''Oh I'll go back tomorrow and get a shot''. Because tomorrow it could be history.
Yes, digital photography is incredible. A few years ago, I "camped by the tracks" for a few days, and took pictures of every car in every train that went by. If that had been film, the expense would have been incredible. And my images are better than any film would have been (35mm).
Ed
With todays Digital cameres you can take thousands of pictures for the price of a SDHC memory card and a camara of course, or what ever those cards are called. I wish I had one back in the late '70s.
Wife says, "Honey why are you taking a picture of that rock?''
I say, "I may want to build one some day."
doctorwayne ModelTrain I have just started to build a cement company kit from Walthers. Right now, I am hesitating. Should I continue building this kit normally or should I cut the eight containers in two so I could dispose this kit on a background to make it appear larger? I'd advise you to do whatever you prefer....most of Walthers structure kits are good candidates for altering and/or kitbashing with other kits. I used their ADM grain elevators, along with Red Wing Milling, and a bunch of scratchbuilt additions to build GERN Industries, an over 6' long traffic generator... ...as the company's slogan says... ...and it has ties to the concrete industry, too... ...and the lumber industry, too... ...and the building industry... ...and, not to be ignored, foodstuffs... Just remember to be sure that you're buying genuine GERN Flux products... Whatever route you choose, have fun creating your layout and building the structures that you want...don't always let the kit's instructions dictate the results. Wayne
ModelTrain I have just started to build a cement company kit from Walthers. Right now, I am hesitating. Should I continue building this kit normally or should I cut the eight containers in two so I could dispose this kit on a background to make it appear larger?
I'd advise you to do whatever you prefer....most of Walthers structure kits are good candidates for altering and/or kitbashing with other kits.
I used their ADM grain elevators, along with Red Wing Milling, and a bunch of scratchbuilt additions to build GERN Industries, an over 6' long traffic generator...
...as the company's slogan says...
...and it has ties to the concrete industry, too...
...and the lumber industry, too...
...and the building industry...
...and, not to be ignored, foodstuffs...
Just remember to be sure that you're buying genuine GERN Flux products...
Whatever route you choose, have fun creating your layout and building the structures that you want...don't always let the kit's instructions dictate the results.
Wayne
Wow, just wow. I am speechless.
Yesterday, I took my bike and went to take a few pictures of a cement plant not too far from where I live. I was thinking that those photos could inspire me.
Stef
ModelTrain Doughless Mine needed to fit in a space half the depth of the kit. So I simply sliced it in half along the crease in the the sides (the green line in the above pic) , then butted the two halves together along the backdrop. Had to make a little mod to the circular roof to fit nicely, but I'm very happy with the results. Yes, it looks larger. Frankly, maybe too big. It looks more like a grain elevator now. I may simply use one half of it. I cut it for depth purposes. Post a few photos to show what your layout looks like.
Doughless Mine needed to fit in a space half the depth of the kit. So I simply sliced it in half along the crease in the the sides (the green line in the above pic) , then butted the two halves together along the backdrop. Had to make a little mod to the circular roof to fit nicely, but I'm very happy with the results. Yes, it looks larger. Frankly, maybe too big. It looks more like a grain elevator now. I may simply use one half of it. I cut it for depth purposes.
Mine needed to fit in a space half the depth of the kit. So I simply sliced it in half along the crease in the the sides (the green line in the above pic) , then butted the two halves together along the backdrop. Had to make a little mod to the circular roof to fit nicely, but I'm very happy with the results.
Yes, it looks larger. Frankly, maybe too big. It looks more like a grain elevator now.
I may simply use one half of it.
I cut it for depth purposes.
Post a few photos to show what your layout looks like.
Haven't gotten around to setting up a public picture account. Might be a while.
- Douglas
ModelTrainI have just started to build a cement company kit from Walthers. Right now, I am hesitating. Should I continue building this kit normally or should I cut the eight containers in two so I could dispose this kit on a background to make it appear larger?
kasskaboose Brava to the OP and follow-on discussion about the cement plant. This industry is quite interesting since I have the Walthers Cement Plant (the larger one with multiple buildings). Thanks also for the pics of those trucks. I had no idea what they carried on the roads. Interesting stuff and clarifying the difference between cement and concrete!
Brava to the OP and follow-on discussion about the cement plant. This industry is quite interesting since I have the Walthers Cement Plant (the larger one with multiple buildings).
Thanks also for the pics of those trucks. I had no idea what they carried on the roads. Interesting stuff and clarifying the difference between cement and concrete!
I have checked on Walthers site for the Vally Cement Company (the largest one) but they don't produce it in N scale. I was thinking maybe that could be my first scratchbuilding project? Or maybe it's too complicated for a newbie like me?
Hi everyone and thanks for your help!
PC101 If this the N-Scale Medusa Cement Company building. I Yellow and Green lines would be the half and half cut.
If this the N-Scale Medusa Cement Company building. I
Yellow and Green lines would be the half and half cut.
PC101 yes it is the Medusa Cement Company in N scale.
Thanks for your great explanation and the photos. I was also thinking of cutting through the yellow and green lines but I'm not so sure anymore. I would like to put this structure on my future background.
maxman PC101 While we are on the OP's supject of Cement and structures, anybody know where to get Dry Bulk Trailers, circa 1960's. Shapeways?
PC101 While we are on the OP's supject of Cement and structures, anybody know where to get Dry Bulk Trailers, circa 1960's.
Shapeways?
Thanks guys, I looked at the Shapeways Dry Bulk trailers. I am not sure about those round bottom discharge outlets. There was a person in Canada that I was trying to contact but I think that person stopped making funnel bottom discharge outlet trailers.
The ingredients for concrete are dropped from their respective storage bins into a weighing bin, to get the correct porportions, then dropped into the redi mix truck, where it is all mixed together, along with the proper amount of water, to make concrete.
I bought a couple of dry bulk trailers from a Shapeway member. I'm happy with them, although I haven't finished them yet.
Mike.
My You Tube
PC101While we are on the OP's supject of Cement and structures, anybody know where to get Dry Bulk Trailers, circa 1960's.
7j43k PC101 Me neither, but untill we hear more infomation from the OP, I would guess the Medusa Cement Company and not the Valley Cement plant. Judging by the OP's above photo showing only the silos and only wondering about sawing or not sawing them up. Also the OP's stock pile of N-Scale building shows the ''Medusa Cement Company''. In that case. If the OP cuts the bins up, he's going to have to deal with re-arranging the roof details, too. It does seem to me that IF the building is sliced up, it should only be done if there's a specific location to put it. For any particular placing, there's probably only one best way to do the cuts. Without such a specific location, if the OP wants to build this kit anyway, I'd vote for not slicing it at all. THEN it can go "anywhere", even maybe turned around. I am sympathetic to the urge to build. I have a couple of the Walthers arc furnace kits I am REALLY looking forward to kitbashing. Ed
PC101 Me neither, but untill we hear more infomation from the OP, I would guess the Medusa Cement Company and not the Valley Cement plant. Judging by the OP's above photo showing only the silos and only wondering about sawing or not sawing them up. Also the OP's stock pile of N-Scale building shows the ''Medusa Cement Company''.
Me neither, but untill we hear more infomation from the OP, I would guess the Medusa Cement Company and not the Valley Cement plant. Judging by the OP's above photo showing only the silos and only wondering about sawing or not sawing them up.
Also the OP's stock pile of N-Scale building shows the ''Medusa Cement Company''.
In that case. If the OP cuts the bins up, he's going to have to deal with re-arranging the roof details, too.
It does seem to me that IF the building is sliced up, it should only be done if there's a specific location to put it. For any particular placing, there's probably only one best way to do the cuts.
Without such a specific location, if the OP wants to build this kit anyway, I'd vote for not slicing it at all. THEN it can go "anywhere", even maybe turned around.
I am sympathetic to the urge to build. I have a couple of the Walthers arc furnace kits I am REALLY looking forward to kitbashing.
I agree with your above first three thoughts.
As with your couple of Arc Furnaces, that will be an awesome build.
7j43k It is not clear to me whether the OP is building the Medusa kit, which is a storage and distribution facility for cement, or Valley Cement, which is a cement manufacturing plant. Both seem to feature the same vertical bin storage structure. Ed
It is not clear to me whether the OP is building the Medusa kit, which is a storage and distribution facility for cement, or Valley Cement, which is a cement manufacturing plant.
Both seem to feature the same vertical bin storage structure.
Me neither, but untill we hear more infomation from the OP, I would guess it is the ''Medusa Cement Company'' and not the ''Valley Cement plant''. Judging by the OP's above photo showing only the silos and only wondering about sawing or not sawing them up.
While we are on the OP's supject of Cement and structures, anybody know where to get Dry Bulk Trailers, circa 1960's.
Walthers also makes (when they're in the mood) "Blue Star Ready Mix":
In the rear, over on the right, is a cylindrical bin that I think holds the dry cement. In front of that, towards us, is the "leg" that is used to lift up sand and gravel from the concrete dump bin at the bottom.
Looks like around here all of our Ready-Mix trucks get filled out of a building fed by a front loader, hopper and a conveyor or auger. The product gets mixed in the metal and steel building and loaded into the trucks sitting under/inside the building.
PC101 PS: The HO cement mixer truck (I think it is an Athearn model) will did not fit though my cut opened roll up door (door opening not tall enough) so I will have to fix that.
PS: The HO cement mixer truck (I think it is an Athearn model) will did not fit though my cut opened roll up door (door opening not tall enough) so I will have to fix that.
I don't know a lot about cement, but it's my impression that ready-mix trucks would not be loaded from a facility like this. I think it would be loaded into a dry bulk trailer, something more like this:
For the ready-mix truck, I think the ingredients are already mixed before they're dumped into the truck.
If this the N-Scale Medusa Cement Company building. I would think that you need to know kind of where you want to set the structure on your layout first before you build it whole or slice it up. I have whole built (per the instructions) buildings still in cardboard boxs. I have bought a second and third kit of same types to slice up and make it fit a particular space. (I have a-round-the-wall layout). Some day the whole built up building (per the instructions) will fit somewhere on my layout or be sliced up to fit. Some of my whole built structures in storage have been removed from my previous layouts.
I would think it would easier for someone to have a "drawn in the sand track design/plan" with a list of intended Industries first, then think how to fit what/which buildings in place before it is built.
With my Cement Co. (HO) I left off the rear section of the silos. The silos have one front, two ends and a rear section. I left off the rear section, it will never be seen or needed for that Industry. The rear section was used at the "feed mill" as added ''building flats'' silos. At the Cement Co. building I also cut open one of those rollup doors for a truck to park under that silo.
If you want to cut the four silos in half to make a longer section of eight silos, make the cut on the center joint of the two end silos on the ends. Or just do not glue on the rear section of the four silos. But you already fasten the rear section of the silos to the side sections.
There are at the least more then three ways to modify the silos, one is in two halfs, in one third two thirds and one cut diagonal. This diagonal cut will have on the end of the silos two silos deep for you to see and one silo deep on the other end for a siding going in on an angle towards a wall.
Orange and Green lines would be the diagonal cut.
White line is the 1/3-2/3 cut.
PS: The HO cement mixer truck (I think it is an Athearn model) did not fit though my cut opened roll up door (door opening not tall enough) so I will have to fix that.
EDIT: Yes, looks like I staged the wrong type of truck under the silo for a Cement manufacturing company. This type of truck (Mixer) would be at a Concrete manufactring plant, around here, a building made of mostly steel and metal.
Hi everyone!
I have just started to build a cement company kit from Walthers. Right now, I am hesitating. Should I continue building this kit normally or should I cut the eight containers in two so I could dispose this kit on a background to make it appear larger?
What do you think? And if I need to cut it, what should be my next steps? I have a razor saw but never used it yet.
Thanks for your help!