kasskaboose An earlier topic suggested using 22 gauge wire for hoses. It's a cheap and easy idea. You can paint the wire any color and it does looks similar to a hose. Perhaps you might consider 24 gauge? http://cs.trains.com/mrr/f/88/p/264175/2982477.aspx Money: 1,000th post!
An earlier topic suggested using 22 gauge wire for hoses. It's a cheap and easy idea. You can paint the wire any color and it does looks similar to a hose. Perhaps you might consider 24 gauge?
http://cs.trains.com/mrr/f/88/p/264175/2982477.aspx
Money: 1,000th post!
I agree, the 22 AWG wire looks the best, especially for unloading hose for tank cars. I've used it before; I believe I found suggestion in an article I've read somewhere.
I've used solder, as well, although the thin gauge wire idea appears to have some merit.
Bear "It's all about having fun."
I too like using solder for hoses, forms easily.
Regards, Peter
MisterBeasley For short, thick hoses you can use women's elastic hair bands.
For short, thick hoses you can use women's elastic hair bands.
Good idea until she spots one of hers on the layout! Guess I'd better ask first. But really, I can see how that would work.
It would be episode 20. There is just a brief glimpse of the hoses which enter the building. After reading the replies I am guessing that solder was used.
http://mrr.trains.com/videos/project-layouts/2011/04/building-bay-junction-20
I used solder for these hoses.
Tank Spot 1 by wp8thsub, on Flickr
Tank Spot 1
Rob Spangler
dknelson An old idea once found in the Model Railroader "Kinks" column but still practical: thin gauge solder (solid, not rosin core). Easy to bend and it holds the bend. Dave Nelson
An old idea once found in the Model Railroader "Kinks" column but still practical: thin gauge solder (solid, not rosin core). Easy to bend and it holds the bend.
Dave Nelson
That's a great idea Dave. I've read that before too, never thought about it!
Thanks,
Mike.
My You Tube
It takes an iron man to play with a toy iron horse.
Maybe tell us what episode of the series your watching so we can see what your seeing.
There are many ways to model the hoses.
EDIT: I get a kick out the little celebrations that go one after one reaches a post milestone.
Surgical tubing tends to have a natural look to it when it lays on the ground. Fabricating couplers for the ends out of styrene should be quite straight forward.
Brent
"All of the world's problems are the result of the difference between how we think and how the world works."
I didn’t see the video you are referring to but I make hoses out of the appropriate color wire. Solid wire works the best because you can bend it into the shape you want.
Looking at a video of the corn syrup facility on the MR&T I am interested in finding out what was used to model the unloading hoses? I do have the Walthers piping kit but I want to have flexible hoses represented. Experiences? Suggestions? Thanks.