Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

NCE Decoders ??

864 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2004
  • 36 posts
NCE Decoders ??
Posted by firechief811 on Thursday, August 11, 2005 5:00 PM
Does anyone use the NCE decoders...I am mainly interested in the D13SR. It looks like a basic low budget decoder. I have the ability to solder it in because I think it comes with just wires, no plug.
I am primarily installing these in Atheran Engines, so there is no need to spend alot of money on an expinsive decoder, I don't think. I just wanted to know if anyone has used these and if there are any problems.
  • Member since
    October 2004
  • From: Colorful Colorado
  • 8,639 posts
Posted by Texas Zepher on Thursday, August 11, 2005 7:02 PM
Yes, this is the primary decoder that we use on our club layout. We purchase them in bulk. In a few hundred decoders we have only had 1 failure so far, NCE replaced it pronto. My only criticism is that they are a little large.
  • Member since
    July 2003
  • From: Sierra Vista, Arizona
  • 13,757 posts
Posted by cacole on Thursday, August 11, 2005 8:06 PM
I've used a lot of different types of NCE decoders and have never had a bad one.
  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Thursday, August 11, 2005 9:05 PM
I'm in the middle of using up a 10-pack of the D13SRJ (same as the D13SR, with a 9-pin JST plug - and for some odd reason usually CHEAPER), and theya re workign out GREAT. Excellent motor control, no bad ones so far. I've stuck them in Walthers Trainline, Bachmann Spectrum, and Proto1000 so far, all but the Spectrum I replaced the light bulbs with golden white LEDs - and SHOULD have stripped the Spectrum to do so, since it came with those annoying blue-white LEDs which are totally too modern for the unit - plus they only half light up the number boards. These are excellent decoders, and are goignto be my fleet standard until something better comes along - the $12/each price in 10 packs from Empire Northern doesn't hurt, either.

--Randy

Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    January 2003
  • 130 posts
Posted by bn7026 on Friday, August 12, 2005 4:51 AM
I highly recommend them.

It's even better with a NCE system with the new EPROM installed. Makes them very easy to program - you don;t have to worry about a single CV.

I'm almost inclined to pull out some of my older NCE D102's and replace them with the D13's.

Tim
Modelling Burlington Northern in Perth, Western Australia NCE DCC user since 1999
  • Member since
    January 2002
  • From: Nova Scotia
  • 825 posts
Posted by BentnoseWillie on Friday, August 12, 2005 6:00 AM
I have a couple and they're okay, and a bit cheaper than the TCS T1s I had been using. I think I'll go back to the T1 for its slightly smaller package and the goof-proof warranty, though. Besides, my local shop carries TCS and I have to order in NCE; unless I gang up with other guys on an order the shipping outweighs any price advantage the D13SR has over the T1.
B-Dubya -------------------------------------------------------------------------------- Inside every GE is an Alco trying to get out...apparently, through the exhaust stack!
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, August 12, 2005 12:29 PM
I bought a 10 pack and can say nothing but great things about them. I've installed them in Athearn and a couple spectrums and all work great. Gets me DCC before the corporation can afford the new big money power.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!