Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

I have a couple of questions about plastering.

1066 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2005
  • From: CNY
  • 116 posts
I have a couple of questions about plastering.
Posted by CrossTrack Trains on Friday, April 8, 2005 11:30 AM
1. What kind of plaster to use?

2. Waht kind of paper should I use with the plaster? (paper towels? newspaper?)
"What else can you Shay"
  • Member since
    July 2003
  • From: Northern Ca
  • 1,008 posts
Posted by jwar on Friday, April 8, 2005 11:50 AM
I trien the plaster and paper method and was inept at it, could not get the results to suit me.

I use screen wire (Alum type) twist and wrinkel it to shape my mountain type road, then spray adhesive on the back side, apply saran wrap on the back side, then stapel and hot glue the screen in place, dulute the patching plaster (wallboard type) and where i need streinght I apply 2,3, coats.

The saran wrap keeps this method from being messey, as the plaster will drip through the screen a bit if not applied.
I'm sure you will get replys to your type of plastering method, just my 2 cents...John
John Warren's, Feather River Route WP and SP in HO
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, April 8, 2005 1:08 PM
We were just making some mountains using the Woodland Scenics kit thingy they sell - basically just some materials and instructions for newbies (i.e. me) fir making mountains...

They had you cut out some templates to tack to the corner of the layout (mountain is in the corner) of the side profile of the mountain, and then cut a tunnel out of cardboard and but it inside the "mountain"... Then they used newspaper balls and that plaster cloth roll stuff to make the insides and the shell of the mountain. I put wax paper over my track to keep any potential drips off the track... It was a pretty easy method to build up a rather large size mountain.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, April 8, 2005 1:11 PM
I use hydrocal that I buy at the local lumber yard in big bags (not the Woodland scenics packages - too much $$$$). I use hydrocal because it is very strong--harder and stronger than joint compound, plaster of paris etc.... I use any old paper towels that I can find on special and apply it all over a wire screen armature. I use two coats of palster soaked towels as the base for my scenery. There are other methods but I like a bullet proof shell for the base. If a visitor bumps or leans on this type of shell there is no damage (except maybe a skinned elbow)....For an example of my plaster work, click on the link below my name....
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, April 8, 2005 1:26 PM
Everything you wanted to know about PLASTER, but not afraid to ask.
There are different types of plaster with different properties like setting time and hardness. Everybody has a preference for the type of plaster they like to use, so no single plaster will be recommended.
Heavy duty paper towels or paper hand towels is best for hard shell.

Joe Fugate uses a cement / plaster "mix". I hope he will post his formula, because I couldn't find that info.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!