My latest rehab projects are 4 stock cars. old metal wood kits. One needs a new roofwalk. it is wood and only half is here because split in half/. So instead of digging around th net looking for a wood part, Just make a new one. Northeast scale lumber order and simple build. but. what size are the boards? 2x10? And the mounting brackets size?
I also cannt ind 40' stock car decals for NYC and nickel plate.
Shane
A pessimist sees a dark tunnel
An optimist sees the light at the end of the tunnel
A realist sees a frieght train
An engineer sees three idiots standing on the tracks stairing blankly in space
Shane: I dug out one my cars. The stock car roof walk measures 36" wide It is three boards wide, with noticable spaces between them, so might be 12" wide boards?
davidmurrayShane: I dug out one my cars. The stock car roof walk measures 36" wide It is three boards wide, with noticable spaces between them, so might be 12" wide boards?
That seems overly wide to me....most of mine seem to be around 1'9", but a lot of my freight cars do have scratchbuilt running boards. The laterals at the car's ends are wider, though.
A lot of the kit cars also have overly thick running boards too.
Wayne
"One difference between pessimists and optimists is that while pessimists are more often right, optimists have far more fun."
So that puts me at about 2x8. To 2x10. So since I don't know the model maker, I can't figure the prototype manufacturer So. Close enough will work for this. shane
Bear, it's nice to see that the link you provided still works, as do the other links to which they're connected.
I'm a little concerned, though, that some of mine might give viewers the feeling that they've been drawn down a worm hole...destined to be bored by my versions of running boards.