Dear Folk,
Haven't found this anywhere. I want to create freshly turned (plowed) sod for my HO Woodland Scenics Farmer, horse, and plow. How can I make that?
Thanks,
Mike
Well, a couple of things come to mind. You can use Vallejo Diorama Effects or you could find some latex or acrylic paint that matches the color of a freshly plowed field, then add some texture (fine sand, grout, etc) and apply to your mounds of dirt. Depending on how "fresh" you're looking for, once the paint dries, you could try applying some gloss (pledge floor finish) or semi-gloss material.
For the mounds, you could apply a bead of caulk (they even come in brown), and shape to your liking before drying.
Terry
Inspired by Addiction
See more on my YouTube Channel
I am curious to hear from someone who actually did this. I have not.
If this was my layout, I would use real dirt or sand, and glue it in place using a similar method used for ballasting track (using an eyedropper, apply alcool, then apply scenic cement). The glue will give it a dark color. The tricky part is getting the right shape of the soil for the look you want - freshly plowed. I would try using styrofoam, punch in some lines, and cover it with dirt.
Simon
Do you still have your corduroy pants from elementary school in the 1960s, then again maybe you are not that old.
You can get some corduroy at the fabric shop, it comes with the bumps and valleys in different widths. The finer the better for our purposes. You can take your plow to the fabric store and buy a corduroy where the grooves match the blades of your plow.
Glue it down and start experimenting with the cheap Walmarts acrylics, greens, browns, blacks..... The best one I ever did I covered the fabric with either tile thin-set or grout shook the excess off and hit it with black and brown spray balms. I then started dabbing the greenery on ( the paints) in the end it looked really good. Placing the little John Deere with the plow on it finished the scene.
Brent
"All of the world's problems are the result of the difference between how we think and how the world works."
Along the same lines as Brent, I've used thin carpet squares that were shaded a blue/green and then painted brown with various shades of black/brown over the top, leaving some the green show through to look like grass. I'll post some pictures later.
Scott Sonntag
The one method the create plowed rows is using the inside of cardboard. That correlated piece works well to shape the field. Some sanded grout or dirt to cover it.
my thoughts for a different plowed field, get colored sanded grout and spread it in a layer over the field. Once it gets stiff, take a soft bristle brush and lightly drag over the area. That should rough it enough but not tear it up and leave plow marks from the bristles.
shane
A pessimist sees a dark tunnel
An optimist sees the light at the end of the tunnel
A realist sees a frieght train
An engineer sees three idiots standing on the tracks stairing blankly in space
mam Dear Folk, Haven't found this anywhere. I want to create freshly turned (plowed) sod for my HO Woodland Scenics Farmer, horse, and plow. How can I make that? Thanks, Mike
You can BUY it:
Walthers part numbers 483-701 and 189-7192. Both versions will need to be painted. I have no idea how good they look after installation.
I have not made a plowed field, but I've done something close in doing run-off texturing in dirt hillsides. Based on that, I would EXPERIMENT with using a slow setting sheetrock mud (mixing your own from dry seems to work better), spreading it out in a layer, waiting until it's dried "just right", and then dragging a multi-blade "plow" through it. You want to catch it midway between runny and set. More towards "set", I think.
If I wanted such a field, I would do the job off-site until I got just what I wanted, then install it in place.
Ed
mamDear Folk, Haven't found this anywhere. I want to create freshly turned (plowed) sod for my HO Woodland Scenics Farmer, horse, and plow. How can I make that? Thanks, Mike
Mike, while it looks like you've been a member of the forum for a while, it says this is your second post.
If that's true, welcome! I hope you can post a picture or two, and tell us more about the layout.
I imagine quite a few of us would like to see your results if your field turns out looking good.
York1 John
I've never made a plowed field, but has anyone tried either fresh coffee or coffee grounds? I would thing the color and texture would be a good starting point.
It takes an iron man to play with a toy iron horse.
Hello All,
MisterBeasleyI've never made a plowed field, but has anyone tried either fresh coffee or coffee grounds? I would thing (SIC) the color and texture would be a good starting point.
I recall seeing a thread or article about making ground foam from used coffee grounds.
The author baked the used coffee grounds at a low temp 150ºƒ, if I recall correctly, to dry them out. They did this to avoid mold growth during storage.
Then they added the used, dried, coffee grounds to the latex paint color of their choice to add texture to the paint.
I could see how this technique could be adapted to model furrows, minus the latex paint.
NVSRRThe one method the (to) create plowed rows is using the inside of cardboard. That correlated (corrugated) piece works well to shape the field.
Using corrugated cardboard as a base or form could produce the results you are seeking.
Another advantage of using the cardboard as a base will allow you to experiment in small sections until you get the look you want.
I would also paint full-strength glue on the carboard to avoid making it soggy through traditional ballasting techniques using "wet water".
Hope this helps.
"Uhh...I didn’t know it was 'impossible' I just made it work...sorry"
In a piece of cardboard is a ribbed piece sandwiched between two thin pieces of card. Gently peel the thin card away leaving the ribbed card. There is your ploughed field. Cheap and effective.
David
To the world you are someone. To someone you are the world
I cannot afford the luxury of a negative thought
Lakeshore SubAlong the same lines as Brent, I've used thin carpet squares that were shaded a blue/green and then painted brown with various shades of black/brown over the top, leaving some (of) the green show(ing) through to look like grass.
Not to disparage your modeling technique, but...
This past April "She Who Must Be Obeyed" and I visited the Chicago Museum Of Science And Industry.
While viewing the HO model train display; depicting the modern BNSF line between Chicago and Seattle,
jjdamnitThe modelers of the display use squares of textured carpet painted to represent various crops in the plains states. When "She Who Must Be Obeyed" saw the squares of carpet she commented, "Look, they haven't finished their scenery either..."
I had to explain to her modelers' license.
Her comment was simply, "Well, it still looks like carpet samples."
I hope your technique is more detailed than what we saw on the CMOSAI display.
Those are far more detailed than what we saw on the museum display!
Great work !!!
I don't think "She Who Must Be Obeyed" would have had the same comment had their fields look like yours.
From the "For What It's Worth" dept:
Living in the middle of corn country, almost all corn fields are planted with 30 inch wide rows. I'm not sure how wide cardboard corrugations are, and what they would translate to in HO.
There is a move to narrow the rows, but it's still unusual for anything except 30 inches.
I accually did a feild on my last layout. Thried many things but what worked best for me was to do my standard zip texturing and then took my scale discker by SS Ltd and plowed the fields while they were still wet, even the turn around details. Added some extra details where needed and when dry added any extra color needed. Worked out great and looked nothing like carpet squares. I mean you need the turarounds etc. to make it look relistic.
Thanks for the ideas. I think I was not clear enough on what I'm wanting to model.
I'm trying to portray a grassy or field of dried corn stalks, that is just being turned (plowed) by a man, horse, and plow. I do not want neat clean rows of dirt. I need to portray sod with grass or stalks that have just been turned over. The dirt behind the plow will be a row of rough "coils"? of sod grass or stalks on one side, and solid smooth earth on the other. Seems some sort of sculpey, caulk, etc., tooled to look like it was turned by the plow might work, but I'm ignorant of how I can actually do this. Is that clearer?
mamHaven't found this anywhere. I want to create freshly turned (plowed) sod for my HO Woodland Scenics Farmer, horse, and plow. How can I make that?
Mike,
If you want to go the easy route, and the area where you will model the field is failrly flat, Busch #7182 is a row-plowed field. The product is actually just exposed corrugated cardboard with brown sprinkles glued to it, but it looks pretty good when installed.
This is the actual, unmodified product in a photograph. For how easy and inexpensive it is, this might make your Woodland Scenics farmer, horse, and plow feel right at home.
JR Miniatures makes a flexible plowed field. This field is a bit more colorful, and has some plant bits on it.
I think it looks a little better, but it is much smaller than the Busch field.
This the JR Miniatures plowed field in a photograph.
Just food for thought... if you want to model a wheat field "quick and easy", nothing beats a TRAMPA from Ikea.
This is what a Trampa looks like on a layout:
I hope this helps.
-Kevin
Living the dream.
I used Woodland Scenics Fine Earth to make my plowed farm field. Sprinkled it into place, applied a white glue mix and ran a kitchen fork through it before it dried.
You could also use WS Earth Blend, either Fine or Medium texture. Toss in some WS Ground Cover if you want some green in the plowed field.
Rich
Alton Junction
Try thin (sock-weight) yarn or thick (button) thread of the color of dirt. Spray it with spray adhesive and sprinkle on a small amount of green ground foam for the grass and tan static grass fibers for longer stalks. Not too much; let the brown show through. Then cut the string to length and glue it down in rows on your brown earth.
--Steven Otte, Model Railroader senior associate editorsotte@kalmbach.com
Steven OtteTry thin (sock-weight) yarn
Good to hear from you again Steven, and with a great suggestion as well.
Hope to see you around more.
mam Dear Folk, Thanks for the ideas. I think I was not clear enough on what I'm wanting to model. I'm trying to portray a grassy or field of dried corn stalks, that is just being turned (plowed) by a man, horse, and plow. I do not want neat clean rows of dirt. I need to portray sod with grass or stalks that have just been turned over. The dirt behind the plow will be a row of rough "coils"? of sod grass or stalks on one side, and solid smooth earth on the other. Thanks, Mike
I'm trying to portray a grassy or field of dried corn stalks, that is just being turned (plowed) by a man, horse, and plow. I do not want neat clean rows of dirt. I need to portray sod with grass or stalks that have just been turned over. The dirt behind the plow will be a row of rough "coils"? of sod grass or stalks on one side, and solid smooth earth on the other.
This grassy or dried corn stalks in a field, would they have been left with the dried ears on them or picked by hand? Would you be plowing them under in late fall of current year or maybe the next spring? Would a horse team and plow turn over tall rows of dry stalks? I never watched that closely. I have seen corn stalks bundled together, shocks, in the fields. This is a interesting subject to follow.
I'm no farmer, but my understanding is that corn fields are plowed in the spring, after the corn stalks are first cut down after being left in the field over the winter.
Here is a video which gives a good look at a freshly plowed field.
https://www.youtube.com/watch?v=aMxsWBiZzP0
richhotrainI'm no farmer, but my understanding is that corn fields are plowed in the spring, after the corn stalks are first cut down after being left in the field over the winter.
Only some do spring tillage. Many till in the fall.
There are advantages and disadvantages to either, and farmers have varying opinions on which is better.
You're pretty much correct Rich. Occassionaly someone does fall plowing which allows the winter moisture break up the soil a little bit.
I'm posting this from memory after leaving the farm following H.S. graduation in 1953. I believe farmers today might have far different techniques than I remember.
Many responders, including myself, have focused on motorized methods of plowing.
I just re-read your post.
mamFarmer, horse, and plow.
What era are you modeling?
rrebell...then took my scale discker by SS Ltd and plowed the fields while they were still wet, even the turn around details.
Great point on the turnaround details, no matter what era you model.
jjdamnitGreat point on the turnaround details, no matter what era you model.
Question on the plow turnaround details.
I can see that in the horse and plow era, no doubt. I can also understand it in odd shaped plots of farmland.
The only farm fields I see getting plowed and prepared are the sugar cane fields in the Florida Okeechobee water basin. These fields are hundreds of acres each, perfectly rectangular, flat (laser pan leveled), and surrounded by access roads on all four sides.
When these fields are plowed, the equipment is turned on the road, then sent straight back across the field. There are no turn around patterns in the soil. All sugar cane is planted in perfectly spaced, perfectly aligned, and perfectly straight rows.
All this preparation makes mechanical harvesting very quick and efficient.
From what I have seen of corn and wheat, the fields seem to be prepared in a similar manner, but I have never witnessed it closely. Judging by how corn and wheat are harvested, I would think that the equipment is also turned off of the field.
What types of fields (modern) should have plow turn-around lines?