Weathered Track

[crisco1]

 

  For mainline, I am going with 2 pts. Badger roof Brown and 1 pt. Poly S Rust.  For

  yards and sidings, I need suggestions.  I don't like the look of Poly S Rail Brown.

  I tried krylon spray paint, and its too brown for my taste.  Can some one give me

 some suggestions.  Also, I have tested the craft paints such as Apple Barrel, Americana, Delta

 Creamcoat paints .

 

                                                                                    Chris                                                                                    

[dehusman]

Roof brown is what I use since its the closest to rusted rail.

Dave H.

[loathar]

First pic is Krylon Camoflauge brown. Second is Rustoleum flat brown.

I like the look of the Rustoleum for older, less used track.

[trainnut1250]

I have used lots of combinations for weathered track. You really can't go wrong.....My favorite is steam power black overcoated with Testor's rust. I've also used rattle cans from OSH with good results along with lots of other paint combos...

 

 

Guy

[Don Z]

I used Pollyscale Rust with a couple drops of Grimy Black mixed in on the rails. The ties were done later with Railroad Tie Brown:

Don Z.

[gandydancer19]

I think that the rails can be the same color.  What is most different between the mainline and sidings is the ballast color.  Ballast color for sidings etc would be darker because it is not maintained as well as the mainline, therefore it would be oily and dirty, thus darker.  I use a slightly darker ballast and then apply a black or burnt umber wash on the non-mainline ballast.  The ties would also be older, so that means a lighter brown with a few gray ones mixed in, and a few darker ones too.

[selector]

Poly Scale Railroad Tie Brown for my mains, and Floquil rust for the sidings and spurs.  I have noticed, and a few have too, that PS Railroad Tie Brown varies considerably from batch to batch.  Assuming that we all do a fairly good job of mixing it before painting the rails, mine is gray-greenish, while others have posted images showing a nice rusty look.   Still others have used plain old craft acrylic paints...see Oct's MR for an example of craft paint rails...looked darking for my taste, but...maybe with the lighting and eyes it is quite realistic.

[loathar]

I would avoid using craft paint on my track. I want something a little tougher. Oil base or Polly Scale seem to hold up pretty good.