Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Shrubbery as fencing (HO)

995 views
11 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2003
  • From: NJ
  • 414 posts
Shrubbery as fencing (HO)
Posted by jackn2mpu on Wednesday, July 16, 2008 12:39 PM
Been watching the Tour de France bike race and got some ideas for my HO layout. One of them is the use of tall trimmed/manicured shrubbery in place of fencing. I know about clump foam for untrimmed shrubs, but I'm looking for something to give me the straight, boxy look (in HO). Not looking to anything fancy like a maze (I don't have the room, though I like the look). I'd thought about using a kitchen sponge, but the cells look too big. And pillow or cushion foam just looks too small. Any ideas?

de N2MPU Jack

Proud NRA Life Member and supporter of the 2nd. Amendment

God, guns, and rock and roll!

Modeling the NYC/NYNH&H in HO and CPRail/D&H in N

  • Member since
    July 2006
  • From: Columbus, OH
  • 37 posts
Posted by millrace on Wednesday, July 16, 2008 12:47 PM

check here:

http://www.sceneryexpress.com/products.asp?dept=1057

  • Member since
    March 2004
  • From: San Diego
  • 954 posts
Posted by stokesda on Wednesday, July 16, 2008 1:07 PM
You could cut a block of pink/blue foam to size, paint it green, then sprinkle some green ground foam or flocking material on it before the paint dries. If you need more foam/flock later, spray with your adhesive of choice and sprinkle on more foam/flock. Repeat as necessary. Voila, block-shaped shrubbery.

Dan Stokes

My other car is a tunnel motor

  • Member since
    February 2005
  • From: Southwest US
  • 12,914 posts
Posted by tomikawaTT on Wednesday, July 16, 2008 2:26 PM

Slot the scenery for an appropriately-contoured strip of thin plexiglas.  Paint trunks and branches on plexiglas.  Apply glue to painted-on twig locations and press down on a layer of green ground foam.  Repeat on other side.  'Plant' hedgerow in slot.

If done along a table-edge ROW, this would give protection against unscheduled rolling stock drops into oblivion.

By using dark green foam on one side and light green on the other you can establish 'sun' and 'shadow' sides.  Flecks of paint or bits of foam of appropriate color could represent the flowers that bloom in the spring, if that's your season.

My signature explains why I won't be exercising that option.

Chuck (modeling Central Japan in September, 1964)

  • Member since
    May 2005
  • From: The mystic shores of Lake Eerie
  • 1,329 posts
Posted by Autobus Prime on Wednesday, July 16, 2008 2:48 PM
NI!
 Currently president of: a slowly upgrading trainset fleet o'doom.
  • Member since
    January 2008
  • From: Abu Dhabi, UAE
  • 558 posts
Posted by Scarpia on Wednesday, July 16, 2008 3:33 PM
you could try the green dish scrubbies - I've used them for hedges in other scales in wargaming to good effect. I would suggest flocking them for railroad use, i think they would look better and handeling shouldn't be a problem.

I'm trying to model 1956, not live in it.

  • Member since
    August 2002
  • From: Corpus Christi, Texas
  • 2,377 posts
Posted by leighant on Wednesday, July 16, 2008 3:42 PM
I went to the www.walthers.com website search function and found a page and a half of hedge scenery.
  • Member since
    December 2004
  • From: Bedford, MA, USA
  • 21,481 posts
Posted by MisterBeasley on Wednesday, July 16, 2008 7:06 PM

 Autobus Prime wrote:
NI!

Got it.  And I'm ready to bite your ankles off.

It takes an iron man to play with a toy iron horse. 

  • Member since
    May 2006
  • From: Brisbane, Australia
  • 784 posts
Posted by mikelhh on Wednesday, July 16, 2008 8:01 PM

 I've seen those "green dish scrubbies" used to make very effective hedges with loose flock glued on for depth and texture.

 

 Mike

Modelling the UK in 00, and New England - MEC, B&M, D&H and Guilford - in H0

  • Member since
    January 2004
  • From: Canada, eh?
  • 13,375 posts
Posted by doctorwayne on Wednesday, July 16, 2008 8:34 PM

The foam packaging that comes with Bachmann Spectrum steamers is useful for making hedges.  Use a new blade in a utility knife to cut suitably-sized strips, then use a brush to paint on a coating of white glue.  Follow this with a dusting of fine ground foam in the colour of your choice.

I glued mine in place using white glue applied directly to the "lawn". 

Wayne 

  • Member since
    August 2004
  • From: Amish country Tenn.
  • 10,027 posts
Posted by loathar on Wednesday, July 16, 2008 8:35 PM
Noch and Busch both make them.
  • Member since
    May 2005
  • From: The mystic shores of Lake Eerie
  • 1,329 posts
Posted by Autobus Prime on Thursday, July 17, 2008 8:00 AM
 MisterBeasley wrote:

 Autobus Prime wrote:
NI!

Got it.  And I'm ready to bite your ankles off.



MrB:

Just so long as you don't say "It".

Ow! I said it!

 Currently president of: a slowly upgrading trainset fleet o'doom.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!