Note: Check your measurements two, three or even four times before cutting.
While the other modules are just as important, module #2 was the hardest one to fit so I made it first just to get it out of the way. Pictures to follow.
(Update) march 20. Modules 1 and 4 frames complete, with plywood tops. Now to clean up a bit to have some room to work.
Johnnny_reb Once a word is spoken it can not be unspoken!
My Train Page My Photobucket Page My YouTube Channel
Remember what Mr. Murphy has to say about this -- "I've cut it 3 times, and it's still too short!"
I think I saw another post where you showed your proposed benchwork plan. Glad you have started it. Measure twice, cut once. I also had benchwork in front of a closet door. I took the door off and hung a sky-blue floor length curtain up. Just a thought as I can't remember what you said you were going to do with the closet door. I used the same color curtains for the windows too.
Elmer.
The above is my opinion, from an active and experienced Model Railroader in N scale and HO since 1961.
(Modeling Freelance, Eastern US, HO scale, in 1962, with NCE DCC for locomotive control and a stand alone LocoNet for block detection and signals.) http://waynes-trains.com/ at home, and N scale at the Club.
cacole wrote:Remember what Mr. Murphy has to say about this -- "I've cut it 3 times, and it's still too short!"
Thanks for making me smile on this monsoonish day! That was my grandfather's favorite expression. He used to say it this way "Drei mal abgeschnitten und immer noch zu kurz!" He must have it from a German cousin of Murphy.
The mind is like a parachute. It works better when it's open. www.stremy.net
gandydancer19 wrote: I think I saw another post where you showed your proposed benchwork plan. Glad you have started it. Measure twice, cut once. I also had benchwork in front of a closet door. I took the door off and hung a sky-blue floor length curtain up. Just a thought as I can't remember what you said you were going to do with the closet door. I used the same color curtains for the windows too.Elmer.