Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

ventilation

1492 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2001
  • From: US
  • 506 posts
ventilation
Posted by snowey on Saturday, January 10, 2004 2:39 AM
how important is it to use proper ventilation when using glue? I live in a very small apartment, and the only way to ventilate the room is to open the window and use an exhaust fan. But, the problem is, it's COLD!!! out (supposed to go down to freezing this weekend) and I'm just getting over the flu.
Can I just get by with wearing one of those disposable dust masks from Home Depot, or somethhing?
"I have a message...Lt. Col....Henry Blakes plane...was shot down...over the Sea Of Japan...it spun in...there were no survivors".
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, January 10, 2004 3:30 AM

Snowey:

Does the word "VITAL" bring anything to mind? The solvents used in most glues do nasty things like KILL BRAIN CELLS.

Now that you have changed your shorts, I'll continue. If you are using tube glue or essentially closed applicators you don't have anything to worry about, provided you have a normally vented envoironment. If you are spraying solvent thinned paints its another matter. You then need a spray booth with a vent fan and fume collector.

If you think it necessary to work in a closed environment you might want a respirator, NOT A SURGICAL FACE MASK. They are relatively expensive but safety is cheap.

IF IN DOUBT GET SAFETY GEAR.

Randy
  • Member since
    February 2001
  • From: US
  • 506 posts
Posted by snowey on Saturday, January 10, 2004 3:49 AM
thanx for you quick response-and I mean quick! Just 1 hour!!!-but I'll be using Testors plastic cement, so from your response I should be fine.
I solved the painting problem long ago, by switching to acrylic paints.
"I have a message...Lt. Col....Henry Blakes plane...was shot down...over the Sea Of Japan...it spun in...there were no survivors".
  • Member since
    March 2002
  • From: Milwaukee WI (Fox Point)
  • 11,427 posts
Posted by dknelson on Monday, January 12, 2004 8:17 AM
The face masks such as you can buy at a drug store are good for keeping particulate matter, such as saw dust, out of your mouth but have no effect on fumes from solvents.
There are things you can do to minimize (but not eliminate) the risks. A small fan should at least keep fumes moving away from you. Get up regularly and stand near a slightly open window for fresh air. Minimize the time you just sit there with the glue.
You might want to investigate the kind of respirator Tony Koester is wearing in his article on tools in the Feb MR. I think Sears has them, as would most home improvement stores/
Dave Nelson
  • Member since
    September 2002
  • 7,474 posts
Posted by ndbprr on Monday, January 12, 2004 11:59 AM
What you need is an organic vapors mask with replacable cartridges. they will only absorb so much and then don't function as intended. yearly changeout is probably adequate.
  • Member since
    June 2003
  • From: Culpeper, Va
  • 8,199 posts
Posted by IRONROOSTER on Monday, January 12, 2004 7:04 PM
Also, keep in mind that the fumes are still in your apartment. So when you are finished you might want to air it out a little bit. Personally, I would get some wood kits for those nights when it is too cold to open a window. Save the plastic for nicer weather.
Enjoy
Paul
If you're having fun, you're doing it the right way.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!