Edit topic

Updated your discussion topic below.

Subject
Enter a subject for your topic. Maximum 150 characters.
Post Body
Enter your post below.
I found away to move the front truck on the LGB F-7 locomotive back to the more correct position. all you do is unscrew the two screws above the truck holding the pivot plate(black plate) to the bottom of the loco, take a pair of nippers to remove the post sticking up from the coupler, it will interfer with the turning on the truck in the new position, you will see two used screw holes in the recessed area that the truck pivot plate goes, that is where you want to put the screws at when you reinstall the truck. This will move the truck back and into a more correct looking position on the locomotive. That is the only real bad thing I found on the LGB F units. Now just to get the working Mars light circuit installed. Feel free to email me if you need this done of have other questions or maintance issues. I do all kinds of LGB/0 scale repairs. Cheers Mike T
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
E-mail Subscribe
Check the box below if you want to receive e-mail notifications when replies are made to this thread.

Receive notifications