Trains.com

Removing lettering from Rolling Stock/Loco

1357 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Removing lettering from Rolling Stock/Loco
Posted by Anonymous on Monday, December 15, 2003 10:41 PM
I have a small selection of trains that I would like to put my own railroad's name on. I found the letter in the December issue of GR but i would like to know if anyone else has any ideas that use ingredients that may be found in a common store or better yet around the house.
  • Member since
    December 2003
  • From: Coldstream, BC Canada
  • 969 posts
Posted by RhB_HJ on Thursday, December 18, 2003 10:12 PM
Depending on the type of lettering (heat stamped, painted, decals) you can use very fine Tamya Waterpaper (1200 grit) together with isopropyl alcohol (rubbing alcohol), you can also try the rubbing alcohol with a Q-tip.

I've removed lettering from LGB cars using Nevr-Dull from Eagle Industries. This is a polishing compound available at automotive supply stores.
Cheers HJ http://www.rhb-grischun.ca/ http://www.easternmountainmodels.com
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, December 24, 2003 8:12 PM
QUOTE: Originally posted by RhB_HJ

Depending on the type of lettering (heat stamped, painted, decals) you can use very fine Tamya Waterpaper (1200 grit) together with isopropyl alcohol (rubbing alcohol), you can also try the rubbing alcohol with a Q-tip.

I've removed lettering from LGB cars using Nevr-Dull from Eagle Industries. This is a polishing compound available at automotive supply stores.


Good to know... thanks
  • Member since
    July 2003
  • From: Nebraska City, NE
  • 1,223 posts
Posted by Marty Cozad on Wednesday, December 24, 2003 11:19 PM
I've used laquar thinner for years to remove the letter on many makes of cars. Put some on a rag and rub off. Don't dip the car.

Is it REAL? or Just 1:29 scale?

Long live Outdoor Model Railroading.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, August 24, 2004 8:36 PM
How would one remove Bachmann lettering. I have wanted a "bobber" caboose for my Indy, but they don't come undeocrated. Any takers?
  • Member since
    September 2003
  • From: Louisville,Ky.
  • 5,077 posts
Posted by locomutt on Tuesday, August 24, 2004 8:41 PM
How much paint will it take off the cars using these methods? I model in "O"scale and am having a similar problem.[:)]

If anybody wants to make a personal reply,you will usually find me on the Trains Magazine forum.

Being Crazy,keeps you from going "INSANE" !! "The light at the end of the tunnel,has been turned off due to budget cuts" NOT AFRAID A Vet., and PROUD OF IT!!

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, August 25, 2004 10:18 AM
I use a product called "ELO" (Easy Lift Off) made by Polly S, you can find it at most hobby shops. Works pretty good. You will need to try it and see how it works on your model, as the results vary. Using a Q tip, on some LGB locos and cars, I was able to remove the lettering and nothing else was required, looked great. On others, I had to repaint after removing the letters.

[8D]

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy