Trains.com

Paint and/or decal remover??

1295 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2006
  • From: Ludington, MI
  • 7 posts
Paint and/or decal remover??
Posted by Dixie Hobo on Friday, October 13, 2006 9:00 PM

Want to remove printed on name on factory locomotive. I believe it is painted on and not a decal. My question is, what can I use to remove the print and still not hurt the plastic?

Dixie Hobo

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, October 14, 2006 2:04 AM

lots of suggestions - i have tried most but it depends on manufacturer

.http://www.bachmanntrains.com/home-usa/board/read.php?f=1&i=169273&t=169273

this is a possible list but like all things everyone has favourites

 

 

  • Member since
    August 2006
  • From: Ludington, MI
  • 7 posts
Posted by Dixie Hobo on Saturday, October 14, 2006 8:10 AM

This is a Bachmann, Climax and at the time I purchased it I could not get an un-dec one so I ended up with a "Michigan California Lumber Company" Loco. That is a lot of print to remove from the side of the cab.

Dixie Hobo

  • Member since
    June 2006
  • 38 posts
Posted by fontgeek on Monday, October 30, 2006 1:26 AM
Often times these are decals, they are easier for the manufacturer to mass produce, and easier for them to get guaranteed results.
If it is a decal, use a hair dryer, or a heat gun with a very mild setting.
Work your way from the the bottom up, warm the full width of the decal, and gently peel it back, be patient, you can rip the decal to pieces if you try to go too fast. Keep working the dryer back and forth across the decal.
The heat softens the adhesive of the decal, and can even help older decals that have become brittle with age to become plyable again.

If it is screen printed on the side, then you might try a 600grit sandpaper or it's equivelent in Scotchbrite. Go carefully, rinse the car often to keep track of your results. You can try solvents, but with bodies made of styrene, it can easily lead to disaster. You may find that sanding it smooth, and then repainting will give you the fastest reslults.

Good luck whichever way you go.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, December 3, 2006 3:26 PM

I just stripped a Bachmann critter with excellent results using brake fluid.  You need to use DOT 3 as that is supposed to be plastic safe.  I used NAPA's DOT 3 with no softenning of the plastic.  I will be using it on my On30 Shay and Climax next.

 

Bee

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, December 3, 2006 8:04 PM

This is what I use when kitbashing with paint and lettering...enjoy. Oh yeah, takes off chrome too.

http://www.chameleonproductsonline.com/

William

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy