Trains.com

Gyroscopic buildings from AristoCraft.

2627 views
23 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2003
  • From: AU
  • 320 posts
Gyroscopic buildings from AristoCraft.
Posted by TonyWalsham on Sunday, February 26, 2006 7:55 PM
I am surprised no one else has picked up on this yet.

On the back page of the current issue of Garden Railways is an ad for Aristocraft buildings.
In their tradition of inventive marketing, Aristocraft are describing these buildings as # 1 Gauge. Not merely suitable for # 1 Gauge, but actually # 1 Gauge.
No mention of scale.
I was wondering how they keep them stable on 45 mm gauge track?
Can anyone tell us what sort of gyroscope they are using so these behemoths of the rails can negotiate R1 curves?
How many wheels and if they are metal or plastic?

Does the hyperbole never end?

Best wishes,

Tony Walsham

   (Remote Control Systems) http://www.rcs-rc.com

Modern technology.  Old fashioned reliability.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, February 27, 2006 1:33 AM
As one that came from a smaller scale I wholeheartedly agree with you. I wi***here was more definition between the different scales, with better scale accuracy of the models. Then people could choose to "scale bash" if they want to (not that there is anything wrong with that), but at least it would be an informed decision, rather than a guess. Perhaps the building is 45mm wide, because then it would be #1 gauge.[:)]
  • Member since
    August 2004
  • From: Virginia Beach
  • 2,150 posts
Posted by tangerine-jack on Monday, February 27, 2006 8:04 PM
More to the point, what do they use for power???????????

The Dixie D Short Line "Lux Lucet In Tenebris Nihil Igitur Mors Est Ad Nos 2001"

  • Member since
    July 2003
  • From: US
  • 1,386 posts
Posted by Curmudgeon on Monday, February 27, 2006 8:33 PM
Eggliners!
  • Member since
    February 2003
  • From: AU
  • 320 posts
Posted by TonyWalsham on Monday, February 27, 2006 8:35 PM
Voodoo???

Best wishes,

Tony Walsham

   (Remote Control Systems) http://www.rcs-rc.com

Modern technology.  Old fashioned reliability.

  • Member since
    August 2004
  • From: Virginia Beach
  • 2,150 posts
Posted by tangerine-jack on Tuesday, February 28, 2006 9:43 AM
You mean the voodoo that youdoo when theydoo the doodoo? [:D]

The Dixie D Short Line "Lux Lucet In Tenebris Nihil Igitur Mors Est Ad Nos 2001"

  • Member since
    August 2004
  • From: Whitmore Lake, Michigan
  • 350 posts
Posted by markperr on Tuesday, February 28, 2006 10:06 AM
I suspect that they will add new problems to sizing of underpasses and tunnels as well!!!!

Mark

  • Member since
    July 2003
  • From: US
  • 1,386 posts
Posted by Curmudgeon on Tuesday, February 28, 2006 11:12 AM
True, but I know how to fix underpass and tunnel sizing issues.
Uses a different gauge.

A twelve gauge.
  • Member since
    February 2003
  • From: AU
  • 320 posts
Posted by TonyWalsham on Tuesday, February 28, 2006 4:14 PM
You lot are supposed to laugh at the inanity of.................

Not wander off at a tangent and improve upon the joke with witticisms I wish I had thought of.[}:)]

Best wishes,

Tony Walsham

   (Remote Control Systems) http://www.rcs-rc.com

Modern technology.  Old fashioned reliability.

  • Member since
    July 2003
  • From: Nebraska City, NE
  • 1,223 posts
Posted by Marty Cozad on Tuesday, February 28, 2006 5:12 PM
If I remember right, most structures are 1:24th scale???
I build my own to 1:29th.

Is it REAL? or Just 1:29 scale?

Long live Outdoor Model Railroading.

  • Member since
    December 2003
  • From: Coldstream, BC Canada
  • 969 posts
Posted by RhB_HJ on Tuesday, February 28, 2006 5:23 PM
Tony,

I wasn't sure what the rotational velocity of this was going to be, so I kept my fingers off the keyboard. But I see we are getting up to speed now and it's safe to have a go at it.

So here is my question: if the gyroscopic buildings travel south of the equator will they rotate in the opposite direction?? [:o)][:o)][:o)][;)][}:)]
Cheers HJ http://www.rhb-grischun.ca/ http://www.easternmountainmodels.com
  • Member since
    July 2003
  • From: US
  • 1,386 posts
Posted by Curmudgeon on Tuesday, February 28, 2006 5:35 PM
Coriolis Buildings!


Maybe the advertising should so reflect.......

I can think of one person who could advise them on how to market that, can't you?
  • Member since
    December 2001
  • From: Smoggy L.A.
  • 10,743 posts
Posted by vsmith on Tuesday, February 28, 2006 5:38 PM
I've learned never to associate the words "Scale" and "Aristo-Craft" in the same context

   Have fun with your trains

  • Member since
    January 2005
  • From: Slower Lower Delaware
  • 1,266 posts
Posted by Capt Bob Johnson on Tuesday, February 28, 2006 5:44 PM
Has the red box had relations with the yellow box? What is the outcome? A chartruse box?
  • Member since
    July 2003
  • From: US
  • 1,386 posts
Posted by Curmudgeon on Tuesday, February 28, 2006 5:45 PM
hehehehe.
I wonder if we are one of the "rogue sites" referred to?

I wonder what scale their steam oil is.......
  • Member since
    February 2003
  • From: AU
  • 320 posts
Posted by TonyWalsham on Tuesday, February 28, 2006 8:25 PM
Hj,

QUOTE: So here is my question: if the gyroscopic buildings travel south of the equator will they rotate in the opposite direction??


No matter which way it rotates, water still goes down the gurgler.
Somehow I don't think #1 gauge buildings would do that.

TOC,

"Rouge site" was actually the wording in the original comment at the AC forum.

Best wishes,

Tony Walsham

   (Remote Control Systems) http://www.rcs-rc.com

Modern technology.  Old fashioned reliability.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, March 1, 2006 1:43 PM
QUOTE: Originally posted by Curmudgeon

hehehehe.
I wonder if we are one of the "rogue sites" referred to?

I wonder what scale their steam oil is.......


FWIW, I just read thru that thread over there and all I can say is:



Aristo, 'best GRR forum'?...



[:D][:D][:D][:p][:p][:p][:D][:D][:D]
  • Member since
    January 2005
  • From: Slower Lower Delaware
  • 1,266 posts
Posted by Capt Bob Johnson on Wednesday, March 1, 2006 4:28 PM
Bob Z, down boy! Consider all the $$$$ they spend with this firm in advertising! You wanna get spanked?
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, March 2, 2006 7:09 AM
QUOTE: Originally posted by Capt Bob Johnson

Bob Z, down boy! Consider all the $$$$ they spend with this firm in advertising! You wanna get spanked?


You said 'spanked'.... [:p][:p][:p][:D][:D][:D]

Ah well, Aristo can do what they want with their forum, it's certainly their nickel. If they think they're inmune from commentary regarding their forum content or their policies however, they're incredibly nieve. I have several Aristo structures and pieces of rolling stock. I think they make good stuff and are a stand-up outfit. Nevertheless, I find it difficult to understand how their attitude towards both product and forum competition promotes the hobby, but that's probably just me. [;)]
  • Member since
    January 2005
  • From: Slower Lower Delaware
  • 1,266 posts
Posted by Capt Bob Johnson on Thursday, March 2, 2006 8:27 AM
I'm laughing!

Just wi***hose structures were in 1:29 instead of 1:24. A 1:32 truck does not look very good parked next to a 1:24 store; and a 1:25 car model looks even funnier next to that 1:32 truck! Sides, a 1;29 building will fit through Tony's tunnels better than the 1:24 ones will, not as much wobble either!
  • Member since
    July 2003
  • From: US
  • 1,386 posts
Posted by Curmudgeon on Thursday, March 2, 2006 11:01 AM
I heard there are special Patented glasses under development, due out when ever, that will make all the stuff, 1:32, 1:29, 1:24, 1:22 and with the upper tri-focal add-on lens, 1:20 all look the same.

They will initially be offered in a one-size-fits-all, but will have to be upgraded to a telescoping earpiece to fit the vast majority of large scalers.
Initial testing by supporters showed the need for the telescoping add-on, but the patent was already in-hand, and they couldn't change it before they went into production.

Keep your eye on St. Elmo's and others......
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, March 2, 2006 11:32 AM
[:D][:D][:D] We havin' fun yet?

You make a valid point about mixing scales…. I don’t much care if I’ve got a 1:24 building next to my Hudson. The taller doors aren’t really a monster deal. I’d like to use 1:32 vehicles next to the trains because they are more in scale and look so to my eye. But, as you’ve said, a 1:24 structure next to a 1:32 vehicle and all of a sudden, you’ve got over a 30% difference in size. Kinda hard to overlook. This is my motivation to scratch build in 1:29 and try and find 1:29 figures.
  • Member since
    December 2003
  • From: Coldstream, BC Canada
  • 969 posts
Posted by RhB_HJ on Thursday, March 2, 2006 12:14 PM
QUOTE: Originally posted by Bob Zajicek

QUOTE: Originally posted by Curmudgeon

hehehehe.
I wonder if we are one of the "rogue sites" referred to?

I wonder what scale their steam oil is.......


FWIW, I just read thru that thread over there and all I can say is:



Aristo, 'best GRR forum'?...



[:D][:D][:D][:p][:p][:p][:D][:D][:D]


Hi all,

There are two reasons I really like manufacturer's clubs and fora:

1. The good ones provide the information we all require from time to time and some really helpful tips.

2. The other variety keeps the spread of .............(insert your choice) rabies in check by attracting the truly "dyed in the wool fans" and "depriving" us of a good number of shill posts.

Of course we each have to decide which belongs to what category.[;)][}:)][:D][:D][:D]
Cheers HJ http://www.rhb-grischun.ca/ http://www.easternmountainmodels.com
  • Member since
    January 2005
  • From: Slower Lower Delaware
  • 1,266 posts
Posted by Capt Bob Johnson on Thursday, March 2, 2006 3:23 PM
TOC,
I thought they were called periscopes, OH, they're on boats!

Bob Z,
You might be havin fun down there in Peach Country, but it's too &^%$#$%^ cold up here for my fingers to work long enough to do anything outside.

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy