Trains.com

Now you can have that copper Roof you always wanted.

1213 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2003
  • From: US
  • 69 posts
Now you can have that copper Roof you always wanted.
Posted by wd8jik on Monday, July 11, 2005 11:16 PM
While at Lowe's today I saw some copper flashing. I bought a roll that was 8 inches wide and 20 feet long. They have a 10 inch wide roll also.
So with tax added it would run about $1.00 a foot.

It has a paper backing glued on the back side with what looks like tar.
The backing should be a good base to glue the copper using most glues.


I crimped the edges of the copper panels with my hand-break, so I would have interlocking panels.



Here are the individual panels.



The panels locked together.


It goes through the Fiskar Paper Crimper, paper and all.



The panels should look great after they turn green with age.
I'll have to see how the Sun effect the tar paper.
I was thinking about roof gutters made from this copper too.

Yogi Wallace,

Bellaire, Ohio

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, July 12, 2005 7:40 AM
THIS was posted in Unlikely treasures , not long ago, you could get at home depot.
  • Member since
    August 2004
  • From: Virginia Beach
  • 2,150 posts
Posted by tangerine-jack on Tuesday, July 12, 2005 8:29 AM
I posted photos of my project in "unlikely treasures". I didn't do the courregations because the project was small. Good pixs!

[oX)]

The Dixie D Short Line "Lux Lucet In Tenebris Nihil Igitur Mors Est Ad Nos 2001"

  • Member since
    February 2004
  • From: Notheast Oho
  • 825 posts
Posted by grandpopswalt on Tuesday, July 12, 2005 12:00 PM
Did you crimp it with the backing still attached?

Walt
"You get too soon old and too late smart" - Amish origin
  • Member since
    February 2003
  • From: US
  • 69 posts
Posted by wd8jik on Wednesday, July 13, 2005 3:21 PM
Walt,
Crimped it with the paper attached.
I tried removing the paper to much work getting it off.
It went right through the Fiskars paper crimper, no problem at all.
Metal, paper, and tar all together is .0156 inch thick, 1/64th inch..
I'm going to put some of the copper out in the sun to see what happens to the paper backing.

Yogi Wallace,

Bellaire, Ohio

  • Member since
    August 2004
  • From: Virginia Beach
  • 2,150 posts
Posted by tangerine-jack on Thursday, July 14, 2005 6:22 AM
Nothing, that's what will happen. This stuff is designed to be on a roof for at least 40 years. Your best bet is to heat it with a professional hair dryer on high heat and scrape with a putty knife. The backing doesnt' bother me in the least.

The copper does turn a nice shade of brown after about a week or so, then the green will turn some time later, maybe 6 months or a year. In anycase, I don't see what is better to use for a copper roof than copper itself.

There is so much of it on a roll, I think all my buildings will be sporting copper roofs.....hmmm, that's kinda like Imperial Rome being covered in marble, I like it!


[oX)]

The Dixie D Short Line "Lux Lucet In Tenebris Nihil Igitur Mors Est Ad Nos 2001"

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy