Trains.com

Scale Delema

875 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Scale Delema
Posted by Anonymous on Thursday, December 30, 2004 2:41 PM
I have a space in the yard for an 8ft x 10ft layout. What would be a good scale to get the best posable layout with this space? S,G, or O and what the standard lengths of track are, example, straight (how long) Curves, radious and lengths. Please forgive me, but I am just getting started in the hobby, garden railroading.[[:D]
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, December 30, 2004 3:21 PM
Are those measurements in meters or feet?
The plastic sleepers (ties, or what ever you like to call them) in G scale track are treated against UV rays from the sun. If you are looking at other scales such as O or S, the plastic is designed for indoor use, so may not last long outdoors depending on what level of UV you get in your area of the world.
A quick search on the net should get you the track sizes. From memory the straights are 1ft, 2ft and 5ft. The curve radius come in 2ft, 4ft and 5ft (so diameter of circle is 4ft, 8ft and 10ft.) You can also get a rail bender and make any size you want.
  • Member since
    December 2001
  • From: Smoggy L.A.
  • 10,743 posts
Posted by vsmith on Thursday, December 30, 2004 4:06 PM
In feet its going to be a tight layout in G, but even in O the diameters are equivelent and will require the same space considerations. If you stick with G you can put a small loop with some sidings using a 5 foot diameter curves will let you use most diesels and some steam locomotives.

   Have fun with your trains

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, December 31, 2004 7:35 PM
I would use G Scale, space is tight however, therefore purchase small locomoties and small rolling stock along with smaller buildings. Purchase 2 or 3 starter sets and purhase some straight track and perhaps 2 switches for a siding. We have a large layout in our back yard and will be constructing a layout just somewhat larger than this in our front yard for our neighborhood children.


Mikadousrp
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, December 31, 2004 7:46 PM
Yeah mate don't forget this is an international forum and you should be more circumspect when stating any measurement. Boh imperial and metric is preferred on this forum these days

Here in Australia we are not allowed to have non metric conversations,nor make non metric statements. Though "give him a centmetre and he will take a kilometre"just doesn't have the same ring to it!

As far as yourmeasurement are concerned I think it is too smallfor "G" scale as this is the only scale worth doing, I wouldn't do anything and get a bigger area.

Regrds Ian
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, January 2, 2005 8:03 AM
Hi Doug
Now that is what could be called a tight corner in "G"
you could well be "up a well known creek without a paddle".
I am sure with a bit of ingenuatie a layout can be fitted in but don't go down to R1 (2') use 2"6"
as a minnimum.
Very small locomotives will be the rule as well as tiny rollingstock
if you have the LGB industrial set the one with a Tiny loco and 4wh industrial
type 4wh wagons thats about what will fit in "G" even in "O" your looking at the same.
"S" and smaller in the garden forget it.
regards John
  • Member since
    November 2004
  • From: Rockville, Maryland
  • 141 posts
Posted by van buren s l on Sunday, January 2, 2005 10:11 AM
Don't let anyone talk you out of a small G guage layout. As others responding to your post have pointed out, small industrial equipment would work well on a 10 x 8 foot railway. Take a peek at Eric Lloyd's equipment on page 67 of the February 2005 issue of GR magazine for examples of small industrial rolling stock. While he scratch built his equipment, similar cars and locomotives are available ready-to-run. Also,check Carendt.US on the web. There are several layout plans that could easily be adapted to G guage for the space avaiable to you. A couple of years ago I expanded my layout and occasionaly have regrets.

Bob
  • Member since
    February 2004
  • From: Vermont
  • 540 posts
Posted by ondrek on Sunday, January 2, 2005 9:34 PM
QUOTE: Originally posted by Douglas LeRoy

I have a space in the yard for an 8ft x 10ft layout. What would be a good scale to get the best posable layout with this space? S,G, or O and what the standard lengths of track are, example, straight (how long) Curves, radious and lengths. Please forgive me, but I am just getting started in the hobby, garden railroading.[[:D]


My G scale will be 7'x16' so i know exactly what you are dealing with. I am going to use 5' dia turns. with a few 4' dia turns here and there.
my layout plan :


So for 8'x10', i would use G, you might be limited to smaller engines just as i will, but they can be just as entertaining as the others, and less expensive too boot!

Kevin

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy