Edit post

Edit your reply below.

Post Body
Enter your post below.
 This is a bit I have copied from the questions and answers page.It's referring to Supercal decal film but I assume that most of them must be similar. "This is another version of SuperCal decal film and requires the use of a finishing spray at additinal expense and you will find that unless you leave a large area of clear decal around the bit you want you will end up with ragged edges to your printing.. If you want a cheaper method of printing your own decals using ink jet printers which does not have these problems and requires no finishing spray then use the JetCal system. If you use water based varnishes it will give you a white background whilst if you want a clear background then use solvent based varnish (asny white spirit based varnish will do) Once again I must advise that ALL methods of printing using computer printers and laser copiers will produce transluscent or transparent graphics which will "disappear" if put on a darker colour except for black which is opaque. The only option is to use the Jetcal system with a water based varnish but you will have difficulty matching the background colour of your decal to the colour of your model as printing and paints do not produce an exact colour match JetCal decal film is available from the Decal Paper Store at www.thedecalpaperstore.com or e-mail them at" There is a bit more to it but is gets very technical.Hope this helps.Troy
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag