Trains.com

Power Pack/Transformer

6035 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2008
  • From: Connecticut
  • 11 posts
Power Pack/Transformer
Posted by Jonfrompeds on Sunday, November 30, 2008 9:34 PM

I work at a pediatrics practice that is installing a 120 foot elevated point to point run in G scale. 

I am looking for suggestions on a throttle/power pack for this point to
point run.  I am trying to keep things simple, but the trains will be running 8 hours a day.  I will definitely purchase a backup of whaterver works well for our needs. 

I may run two locomotives together.  So far we have an Aristocraft 0-4-0, an LGB Streetcar and an LGB 5 unit LCE passenger train.  According to the information I have the LCE passenger train was modified to have two power cars.  That is the situation under which I may run two locomotives.

Thanks in advance.

  • Member since
    October 2006
  • From: silver spring, md
  • 1,232 posts
Posted by altterrain on Sunday, November 30, 2008 11:18 PM

 I am going to recommend the MRC Power G for you. Simple to use, 10 amps of power and not too expensive - http://www.ehobbies.com/mrcag990.html.

-Brian 

President of
  • Member since
    June 2008
  • From: N. California & Nevada
  • 448 posts
Posted by g. gage on Monday, December 1, 2008 11:53 AM

Brian, that looks like a good choice, I have a MRC 6200 and it's not quite enough power for two locos (four motors) running continuous.

Rob

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Monday, December 1, 2008 7:00 PM

The 10 amp MRC should do the job quite well. I would also suggest looking into the Split Jaw Multiple Stop Reversing unit.

http://www.railclamp.com/displayCategory.jsp?categoryId=33&vId=86098

Tom Trigg

  • Member since
    November 2008
  • From: Connecticut
  • 11 posts
Posted by Jonfrompeds on Monday, December 1, 2008 11:14 PM

Thanks for the information.  I had already been looking into the Power G so I think that is what I will go with.  I already purchased an auto-reversing unit that someone recommended to me, but will keep your suggestion in mind in case what I get does not work as expected.

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Monday, December 1, 2008 11:28 PM

Sounds like you have everything in "go status".

Especially when it is up and running.

Tom Trigg

  • Member since
    August 2005
  • From: Texas
  • 182 posts
Posted by MTCarpenter on Thursday, December 4, 2008 12:41 PM

 altterrain wrote:

 I am going to recommend the MRC Power G for you. Simple to use, 10 amps of power and not too expensive - http://www.ehobbies.com/mrcag990.html.

-Brian

-----------------------------------------------

Forgive my newbie question here, but this unit is a speed controller AND a power supply?  I've been looking to upgrade my speed controller from the basic one I got from my starter pack, but when I read about them sometimes it seems like you need two separate units.  Electricity is not my strong suit.

"Measurement is the way created things have of accounting for themselves." ~ A.W. Tozer
  • Member since
    October 2006
  • From: silver spring, md
  • 1,232 posts
Posted by altterrain on Thursday, December 4, 2008 1:33 PM

 Yes, its all in one -

-Brian 

President of
  • Member since
    August 2005
  • From: Texas
  • 182 posts
Posted by MTCarpenter on Thursday, December 4, 2008 3:38 PM

 Thanks for the quick reply! Thumbs Up

"Measurement is the way created things have of accounting for themselves." ~ A.W. Tozer
  • Member since
    January 2009
  • 1 posts
Posted by magic1 on Wednesday, January 21, 2009 1:26 PM

 i use the mrc a990 for my mainline, running 3 to 5 locomotives and a tech II railmaster 2400 for my mainyard and trolley yard.  in combination, they give me enough power to play to my heart's content together with my son.  in this way we both can enjoy running my indoor layout--

(The LGB Railway )The Little Great Big Railway.

  • Member since
    February 2007
  • 18 posts
Posted by prsl-sj on Saturday, February 14, 2009 7:05 AM

The MRC Power G is a very good power and control pack. I have run up to 3 locos  Bruce

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy