Trains.com

K-27 pilot ... removing the snow plow

1333 views
13 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2006
  • From: SF bay area
  • 682 posts
K-27 pilot ... removing the snow plow
Posted by Nataraj on Tuesday, July 8, 2008 2:45 AM
ok, I got my K-27! (painted unlettered / black / plow). Now, I am going to switch over to a road pilot instead of a snow plow...well, because there is no snow here in CA. I looked under the engine, but could not find the screws to remove the plow. No instructions for that.. and I found nothing on google.

How do i remove the plow?

Thanks,
Nataraj
Nataraj -- Southern Pacific RULES!!! ------------------------------------------------------------------------------------------------------------- The GS-4 was the most beautiful steam engine that ever touched the rails.
  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Tuesday, July 8, 2008 10:42 AM

NataraJ:

Just throw a bit of rust on it and it will eventually fall off.  (Sorry, just being my obnoxious self, especially since I am in envy of not having one myself.)

Tom Trigg

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, July 8, 2008 12:33 PM

Nataraj

What are you going to do with the plow once off???

Toad

Triggy.....man you need a day job Laugh [(-D]

  • Member since
    May 2006
  • From: SF bay area
  • 682 posts
Posted by Nataraj on Tuesday, July 8, 2008 1:51 PM
Ok... I figured it out. It comes off with 2 screws and some attachments to the boiler.

Toad,
I want to replace it with a road pilot.

Nataraj
Nataraj -- Southern Pacific RULES!!! ------------------------------------------------------------------------------------------------------------- The GS-4 was the most beautiful steam engine that ever touched the rails.
  • Member since
    May 2006
  • From: SF bay area
  • 682 posts
operating Johnson bar
Posted by Nataraj on Wednesday, July 9, 2008 12:32 AM
Also, not sure if I should make a new thread for this... but..

The description says the loco has a operating Johnson bar.... how do I operate it? I tried moving it manually, even pushing on the lever in the cab, but it didnt move. Is this a DCC only feature?

Thanks.
Nataraj -- Southern Pacific RULES!!! ------------------------------------------------------------------------------------------------------------- The GS-4 was the most beautiful steam engine that ever touched the rails.
  • Member since
    September 2003
  • From: Centennial, CO
  • 1,192 posts
Posted by kstrong on Wednesday, July 9, 2008 1:27 AM
Try pulling up slightly then moving it forward or back. If they're using the same construction they use in other locos, it's got little notches in it to keep it in position (like the prototype).

Later,

K
  • Member since
    May 2006
  • From: SF bay area
  • 682 posts
Posted by Nataraj on Wednesday, July 9, 2008 2:14 AM
Ill try that.

Thanks
Nataraj -- Southern Pacific RULES!!! ------------------------------------------------------------------------------------------------------------- The GS-4 was the most beautiful steam engine that ever touched the rails.
  • Member since
    May 2006
  • From: SF bay area
  • 682 posts
Posted by Nataraj on Wednesday, July 9, 2008 2:48 AM
Thanks, that worked. But is there any difference in operation? I dont see any...
Nataraj -- Southern Pacific RULES!!! ------------------------------------------------------------------------------------------------------------- The GS-4 was the most beautiful steam engine that ever touched the rails.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, July 9, 2008 8:35 AM

 Nataraj wrote:

Toad,
I want to replace it with a road pilot.

Nataraj

Ok, now what you going to do with the snow plow, I could use it.

Toad

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Wednesday, July 9, 2008 10:48 AM

 ToadFrog WhiteLightn wrote:
 Nataraj wrote:
Toad,  I want to replace it with a road pilot.   Nataraj
  Ok, now what you going to do with the snow plow, I could use it.  Toad

Toad:

What you gonna do with a snow plow?  Don't think it will do any good pushing the green junk out of your "pond".  Dude, you live in Texass!  On the rare occasion if it does snow in your neck of the woods it's gonna melt before you could get outside to push it anywhere.

Tom Trigg

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, July 9, 2008 11:08 AM
 ttrigg wrote:

 ToadFrog WhiteLightn wrote:
 Nataraj wrote:
Toad,  I want to replace it with a road pilot.   Nataraj
  Ok, now what you going to do with the snow plow, I could use it.  Toad

Toad:

What you gonna do with a snow plow?  Don't think it will do any good pushing the green junk out of your "pond".  Dude, you live in Texass!  On the rare occasion if it does snow in your neck of the woods it's gonna melt before you could get outside to push it anywhere.

Uncle Tom,

Really need to cut back, Texass is spelled Texas or Tejas but I understand you would not have known because of the tick. As for snow you should have checked.....

Toad

  • Member since
    May 2006
  • From: SF bay area
  • 682 posts
Posted by Nataraj on Wednesday, July 9, 2008 1:54 PM
Ok, now what you going to do with the snow plow, I could use it.

Toad




Well, I dont have a road pilot yet, so until I can get hold of one I need to have something. When I do get one, I will send you a message. Unless you have a road pilot you want to trade.... if so, please send me a message. I would be happy to swap pilots with you.

Thanks.
Nataraj -- Southern Pacific RULES!!! ------------------------------------------------------------------------------------------------------------- The GS-4 was the most beautiful steam engine that ever touched the rails.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, July 9, 2008 2:08 PM

Nataraj

Email sent.

Toad

  • Member since
    May 2006
  • From: SF bay area
  • 682 posts
Posted by Nataraj on Wednesday, July 9, 2008 6:09 PM
Ok, well, this forum has an old expired email address of mine, so the email will not get through. Send me a PM, or I can email you. Whichever you prefer.
Nataraj -- Southern Pacific RULES!!! ------------------------------------------------------------------------------------------------------------- The GS-4 was the most beautiful steam engine that ever touched the rails.

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy