Edit post

Edit your reply below.

Post Body
Enter your post below.
Hi, LGB switch motors are intended to work on half-wave DC. They will work on DC, but you have to be careful if you actuate the control for too long - or worse if it welds itself - then you can burn them. The diodes to get half-wave are built into the LGB switch boxes. But you can just as easily build your own panel by using the schematic on George Schreyer's site[img]http://www.girr.org/girr/tips/tips1/turnout_controls.gif[/img] While you're at it read the other tips. http://www.girr.org/girr/tips/tips1/lgb_1600.html#controls  Hope that helps Cheers ER  PS Happy New Year to everyone!
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag