TMCC Question

[choochin3]

Hi Guys,
I need to know if I can use the TMCC system to run trains on seperate tracks.
I run conventional trains and have several unconnected loops of track.
Also can I run Flyer stuff with TMCC?

Many Thanks,
Carl T.

[EIS2]

Yes,just connect a wire from the command base to each separate loop outside rail.

Good Luck...
EIS

[dougdagrump]

To operate conventional locos with TMCC on seperate loops you would also need a TPC, Track Power Controller, on each loop and your power source would be connected thru the TPC to the track. I believe Lionel has more detailed info on their website.

[Anonymous]

http://www.coilcouplers.com/tmc/tmc.html

Interactive tutorials.

You will need some type of device to vary the track volatge. TPC's, a new ZW, or PowerMasters will allow you to do this. Depending on what you are trying to control and what power supplies you have, you can make a better decision on how to go about doing it.

AF trains can be modified to run TMCC:

http://www.tuveson.com/

chuck

[choochin3]

I forgot to mention I am using a new Lionel ZW transformer as a power supply.

Carl T.

[Anonymous]

All you need is a Cab-1 and base station. New ZW can control up to four independant loops. You can control AC powered american Flyer as well.