Trains.com

Pre-wiring of layout

649 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Pre-wiring of layout
Posted by Buckeye Riveter on Wednesday, December 28, 2005 2:29 PM
Many of you know that I ripped out the wiring on my layout this past year and re-wired it because I did a make shift job in the first place. Wiring of the second phase of the layout has started and I thought you would want to see what is meant by “pre-wire”. Since just the framework is built, I drilled 5/8” dia. holes to string the wire. The tap splices have worked beyond my expectations and are very easy to install. (Don’t use them on your boat trailer because the road salt will corrode them. )



To wire a lighted accessory, I just drop two wires through the top and use the tap slices to hook to the yellow and black common wires. The red-black combination is the track power.


Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    October 2004
  • From: S.E. Ohio
  • 5,434 posts
Posted by Blueberryhill RR on Wednesday, December 28, 2005 2:50 PM
Buckeye...that looks very good. Are you using stranded or solid wire?
Your wire color coding will come in handy.
Chuck
Chuck # 3 I found my thrill on Blueberryhill !!
  • Member since
    April 2005
  • From: Wisconsin
  • 42 posts
Posted by tdetmer on Wednesday, December 28, 2005 9:07 PM
Buckeye,

I will be doing some wiring soon and the tap splices look ideal for my needs. Where do you recommend getting them? I assume maybe a Home Depot or hardware store, or would Radio Shack be a better bet?

Tom
  • Member since
    January 2003
  • From: Jamestown, NY
  • 658 posts
Posted by tschmidt on Wednesday, December 28, 2005 9:48 PM
Buckeye,

Nice job on the wiring. Are you able to make sure you that the tap splices have made good contact? I prewired mine also and I can show you on Saturday when you are here. I wound up soldering my connections but for the future I may try your method. I found a great wire stripping tool that allows me to string all wire and tap into the mains without cutting it. It allowed me to connect everything without cutting any wires.

Tom S
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Sunday, January 1, 2006 11:34 AM
I used to run wires through holes (in the steel angle that I use); but, after a few experiences of removing or relocating members, I vowed to stop doing that. Now I fasten wires to the sides or bottoms of structural members.

Bob Nelson

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, January 1, 2006 12:34 PM
Very similar to my method, Buckeye. When I ran out of places to drill holes I started using screw eyes, very easy to re locate. And yes color coding makes it all very easy...Tim


Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month