Trains.com

Elevations

650 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Elevations
Posted by Anonymous on Thursday, December 1, 2005 7:37 AM
What formula is used to calculate an elevation? I dont have a lot of space but need to elevate the track about 7 inches.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, December 1, 2005 8:15 AM
Normal grades on real railroads are limited to 2%, aka 2 feet of rise over 100 feet of run. Toy trains can get away with steeper grades but from a practical standpoint, try to keep it under 4%, aka 4" rise over 100". 100" is about 8 1/3 feet. A 4% gade that would raise the track approximately 8 inches would require about 17 feet of "ramp'. Grades eat up a lot of space. You should also ty to transition in and out of one with decreased grades at beginning and end, this can also chew up additional space.

  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Thursday, December 1, 2005 8:58 AM
Here's an example. You measure the length of the track on your hill and it comes out to 8 feet, 4 inches long. Then, you measure the elevation and it comes to 4 inches.

The formula for slope is rise/run.

Slope? (we need this expressed as a percentage.
Rise: 4"
Run: 100" (8', 4")

So,

4 divided by 100 equals 4.

Therefore,

Slope equals 4 percent; a good slope for modeling the defunct Tennessee Pass :-)
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Thursday, December 1, 2005 9:08 AM
If your tabletop is level, btw, measuring elevation is easy enough. However, if your table is sloped like mine used to be (rather rare among other modelers), you can figure out the level by using one of those 3-foot long carpenter's levels. For longer distances, you can mount the level on a straight long piece of wood or pipe.
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Thursday, December 1, 2005 12:32 PM
Another way is to measure to the ceiling (if any).

Bob Nelson

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month