Trains.com

couple of tmcc questions....

1001 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
couple of tmcc questions....
Posted by Anonymous on Tuesday, October 4, 2005 10:59 AM
I asked this a while ago, but I cant find the post anymore....
What were the web sites for tmcc decoder boards to convert post war
engines to comand contol? looking for the ones with sound.

How many cab1 remotes can you have running on the same layout.
thinking one for me and one for my old man when he comes over to run trains?
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, October 4, 2005 12:15 PM
www.tastudios.com

http://www.digitdynam.com/


I've seen as many as 5 remotes working against the same command base with the only issue being if more than one user tries to control the same device.
  • Member since
    July 2003
  • From: Watkinsville, GA
  • 2,214 posts
Posted by Roger Bielen on Tuesday, October 4, 2005 12:31 PM
Using 2 CAB-1's for the same engine usually isn't a problem since the probability of both giving commands at the same instant is remote. I use 2 when one of the grandaughters is running a train, just in case.
Roger B.
  • Member since
    February 2004
  • 76 posts
Posted by winrose46 on Wednesday, October 26, 2005 7:29 PM
I currently use 3 CAB1 and 4 DCS controllers to handle 14 trains simultaneously. The multiple controllers facilitates switching between engines as well as giving you the ability to hand over engine control to multiple persons.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, October 26, 2005 8:16 PM
At train shows, Ive seen up to 20 TMCC remotes being run at one time... several layouts, yet the reach is about 100 feet, antenna fdully extended
  • Member since
    January 2001
  • From: US
  • 281 posts
tmcc with conventional locos
Posted by rogruth on Wednesday, October 26, 2005 10:39 PM
The various books and articles state that conventional locos can be operated with the Cab-1 remote.So far I have not been able to do this,I think every thing is connected properly,but I get no response at all. Any help would be appreciated. roger
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, October 26, 2005 11:51 PM
Roger
You can operate Conventional from Cab 1 but you need a TPC or PowerMaster to do so. I am not sure what your set up is---do you have a TPC/PoMA and its still not working for Conventional engines?

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month