Trains.com

track cleaning

1414 views
15 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
track cleaning
Posted by Anonymous on Wednesday, September 21, 2005 6:26 PM
I was looking at my train layout today and i realized that my track is really dirty and probably to be cleaned. i have no idea what to use to clean it. i have this brasso metal polishing stuff laying around but i don't know what it will do to my atlas track if i use it. if somebody would give me a better idea than this i would greatly appreciate it.
  • Member since
    December 2004
  • 3,176 posts
Posted by csxt30 on Wednesday, September 21, 2005 7:11 PM
Gee, I've been using a cleaner called Goo Gone. I would hold up & wait for others suggestions, though. I once had a track cleaning car, & that's what they reccomended. I like the lemon smell, also. Thanks, John
  • Member since
    February 2005
  • From: Vancouver Island, BC
  • 23,330 posts
Posted by selector on Wednesday, September 21, 2005 9:47 PM
According to the preponderance of modelers next door in the Model Trains forum, MAAS, metal polish for mag wheels, Goo Gone, Goof Off, Acetone, Bright Boys, dragged pieces of masonite (I'm not pulling your leg), and a host of other cleaners have produced satisfactory results for their backers.

I have EZ-Track (pthheww..!), and have been using it since...umm...2002. Some of it is only 7 months old. I have never cleaned my track, but I have cleaned my loco wheels with Goof Off, and I can tell you that it worked very well.

MAAS gets high marks from a lot of the older modelers who don't particularly like cleaning track (no kidding!) because it leaves a film that IS conductive and inhibits further corrosion.

My recommendation? For small spots and to degum your loco wheels, buy a small can of Goof Off (Home Depot, Walmart) and try not to cry when you fork out the $3.00. The MAAS is better for when you realize that today is track cleaning day and you will be busy for a while...and don't want to do it again soon.
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Wednesday, September 21, 2005 10:13 PM
I rub it with a Scotch-Brite pad, as do a lot of folks. Search in the forum on "scotch brite" and you will find topics with a lot of track-cleaning advice.

Bob Nelson

  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Posted by Jumijo on Thursday, September 22, 2005 5:22 AM
I use 91% isopropol alchohol. Pour some on a folded paper towel and rub over the rails until they are clean. It's also great for cleaning wheels and pickup rollers. I use a cotton swab for those. It dries almost instantly, leaves no residue and one bottle costs about 89 cents at Walmart. One bottle will last you a long time. I do this at least once a week and I've had the same bottle since January. It's not even close to empty.

You would not believe how black those paper towels get after the first swipe. Subsequent wipings (usually 2) until no black shows fini***he job.

Jim

Modeling the Baltimore waterfront in HO scale

  • Member since
    August 2003
  • From: Delray Beach, FL
  • 311 posts
Posted by andregg1 on Thursday, September 22, 2005 7:20 AM
I use wd-40 or alchohol.
good luck
Andre.
  • Member since
    March 2004
  • From: Over the Rainbow!
  • 760 posts
Posted by eZAK on Thursday, September 22, 2005 8:41 AM
I like to use denatured alcohol rather than iso.(a.k.a. Heet fuel additive, rubbing alco., etc.)
I think it has been said that iso. attracks or holds water.
I also think denatured dries quicker

Goof-off is harmful to paints!
Goo-gone leaves a residue!
Maas is great for polishing but not lite cleaning.
Acetone maybe to harmful for you and your track.
Relax, Don't Worry, Have a Home Brew!</font id="size2"> Pat Zak</font id="size3">
  • Member since
    September 2003
  • From: West coast, USA
  • 356 posts
Posted by rlplionel on Thursday, September 22, 2005 10:36 AM
Years ago I stopped into a hobby shop for track cleaner. The shop was out of it that day, but the person working there told me the stuff sold as track cleaner was re-formulated Windex. He said to dampen a rag with Windex and wipe the rails. Then, follow-up with a dry rag to remove any residue. So that's how I've been cleaning track for over 20 years.

Robert
http://home.surewest.net/rlplionel/Robert.htm
  • Member since
    February 2005
  • From: Vancouver Island, BC
  • 23,330 posts
Posted by selector on Thursday, September 22, 2005 12:38 PM
Actually, that is not a bad idea, Robert. Even more potent might be TSP or Sudsy Ammonia. Hmmmm......
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, September 22, 2005 4:42 PM
thanks everyone for the tips. i really appreciate all of the helpful advice that i get from you guys. i will try a couple of the suggestions on the less noticable track first. thanks again
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, September 22, 2005 11:22 PM
I have been using a product call Performance Plus 3 electric motor cleaner to clean my track. On the can it states removes oils, greases, grime, dirt and other contaminates. Also, its "EXTREMELY FLAMABLE". Its mainly used on R/C cars. It comes in a 13 oz. spray can. It sells for around $6.00 a can. One other thing I like about it, on the can it states safe on plastics and car bodies.
  • Member since
    March 2004
  • 1,774 posts
Posted by Dr. John on Friday, September 23, 2005 8:59 AM
I'll add just one caveat: NEVER use steel wool! Those little pieces will get pulled right into your engine's electric motors.

I like brite boys for tough dirt, isopropyl alcohol for general cleaning (it evaporates quickly, leaving no residue).
  • Member since
    August 2003
  • From: Delray Beach, FL
  • 311 posts
Posted by andregg1 on Friday, September 23, 2005 6:09 PM
I think is like cold solvet. Do you know where buy?Andre.
QUOTE: Originally posted by Jim Sutter

I have been using a product call Performance Plus 3 electric motor cleaner to clean my track. On the can it states removes oils, greases, grime, dirt and other contaminates. Also, its "EXTREMELY FLAMABLE". Its mainly used on R/C cars. It comes in a 13 oz. spray can. It sells for around $6.00 a can. One other thing I like about it, on the can it states safe on plastics and car bodies.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, September 24, 2005 12:55 AM
Good Morning,
I sell it my store (Jim's Train Shop). Should you like to purchase a can, please give me a call today between 11:00 am and 5:00 pm est. My phone number is 724-479-2026.

  • Member since
    May 2005
  • 22 posts
Posted by pushnshove on Saturday, September 24, 2005 1:39 AM
My local hobby shop guy recommended a track cleaning eraser. Any thoughts?
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, September 24, 2005 2:42 PM
We use a Scotch-Brite cloth (Wal-Mart, 2 towels for $3) wrapped around a block of wood. If the track is really dirty, put some Denatured Alcohol on the cloth before going over the tracks. Denatured Alcohol is safe for the rubber traction tires, Iso...well, maybe a different story as well with the other chemicals. Our tracks seem very clean till we use the smoke chambers of the engines, then they get a greasy film. If your tracks are real dirty, maybe start with a Scoth-Brite pad (green), then on with the cloth.
Do it easy and safe...Sophia

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month