Trains.com

is MDF a decent subroadbed?

876 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
is MDF a decent subroadbed?
Posted by Anonymous on Tuesday, August 23, 2005 8:25 PM
Is MDF ok under homosote as a roadbed material?

it has a little more flex than plywood.

what about OSB?

thanks
TPL
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Tuesday, August 23, 2005 8:54 PM
PL, the answer to MDF is NO. It is not designed to be used in a horizontal application. It is very prone to sagging. Also, it doesn't hold fasteners very well.

OSB is not the best, but it is better than MDF. I have been considering using it on my upper deck, but I haven't made up my mind yet.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, August 23, 2005 9:31 PM
MDF also requires special blades when cutting/drilling to prevent chipping/breakage and it produces a lot of dust. It is also heavier than plywood. OSB has a tendancy to sag in horizontal use when placed under load. If you go that route, add an 1/8 to 3/16 inch in thickness to help stiffen it. When you consider the cost difference per sheet, what's the point? You can use B/C plywood for trainboard since no one will see the surface anyway.
  • Member since
    March 2004
  • From: Over the Rainbow!
  • 760 posts
Posted by eZAK on Wednesday, August 24, 2005 6:16 AM
TPL,
I would go with 5/8" or 3/4" B/C ply. Depending on your frame work.
Then cover that with your Homesote or insulation board (pink or blue).
Relax, Don't Worry, Have a Home Brew!</font id="size2"> Pat Zak</font id="size3">
  • Member since
    April 2004
  • From: Holland
  • 1,404 posts
Posted by daan on Wednesday, August 24, 2005 8:14 AM
The real advantage from MDF is in the landscaping section. You can build the frame's for mountains and other substructures with it, it's very good to glue with woodglue or hotglue (works fast and is stable). As said before, MDF is not a rigid ground to build your railroad on. I used OSB, which is the cheapest material in Holland for constructions, and I used the 18mm thick ones. It's in use under different layouts now for about a year and no sagging or moisture problems with it.
Daan. I'm Dutch, but only by country...
  • Member since
    August 2004
  • From: Whitmore Lake, Michigan
  • 350 posts
Posted by markperr on Wednesday, August 24, 2005 10:10 AM
MDF will also swell fairly rapidly when exposed to liquids. I agree with others about horizontal strength. It will NOT hold the weight of your average adult male.

Mark

  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Posted by Jumijo on Wednesday, August 24, 2005 10:50 AM
I've never had any problems cutting or drilling MDF with ordinary tools. Never had any chipping, etc. But I do know from experience that it doesn't take screws very well. I experienced splitting around the screws, but to be honest, If I had predrilled the screw holes, it might not have split.

I used 1/2 plywood over 2x4 joists spaced 2 feet apart. I'm not worried about it holding full grown people. I don't intend for any to be on the table. Also, my entire benchwork and plywood tops cost me nothing. All the material was scrounged/recycled from construction projects. Anyone ever consider breaking up palets for joists or legs or bracing? People give them away all over the place here.

Jim

Modeling the Baltimore waterfront in HO scale

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month