Trains.com

upgrades for dummies 101

883 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
upgrades for dummies 101
Posted by Anonymous on Wednesday, May 11, 2005 8:39 AM
Has anyone purchased one of those upgrade kits that Williams electric trains offers to convert a dummy unit to a motorized one??? How difficult is it to install?? Any problems with it ??? Thanks Easter
  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Wednesday, May 11, 2005 10:25 AM
Easter,

I just bought the 027 FA A-A set at York. They did not have the upgrade kits there, so I have yet to acquire one. I did ask the Weaver folks about the upgrade. They said it is very easy and after examining the internals of my dummy and powered units, I tend to agree. The trucks are held to the frame with one screw from the bottom that when removed, separates the motor from the truck and thus the frame also.

What I was told is that you transfer the sideframes (two screws each) from the dummy trucks to the new powered trucks. Change the wiring to the trucks (wiring uses eye lugs to attach common and power to the trucks). Attach the circuit board with doublesided foam tape. Plug in the wires (all wires equipped with plugs) and you are ready to go.

Regards,
Roy

Regards, Roy

  • Member since
    December 2003
  • From: Baltimore, MD, USA
  • 263 posts
Posted by 4kitties on Wednesday, May 11, 2005 11:13 AM
Has anyone heard any rumors about Williams offering a power unit upgrade for their Golden Memories Alcos? My set just doesn't have the get-up-and-go of my other, twin-motored Williams locos. I would power the dummy unit in a heartbeat if I could.

Joel
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, May 11, 2005 12:21 PM
Roy , it sounds good. I might be able to pull it off. thankd Easter
  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Wednesday, May 11, 2005 3:41 PM
4kitties,

Call them at 410-997-7766.

The web site does not show the power upgrade kits, but the 2005 Vol 2 catalog (actually a big foldout sheet) shows a dual motor power uprade kit for the 0-27 FA-1 "A" dummy at $84.95 (reg price $99.95).

Regards, Roy

  • Member since
    December 2003
  • From: Baltimore, MD, USA
  • 263 posts
Posted by 4kitties on Thursday, May 12, 2005 10:55 AM
I just called Williams and they said they do not have a power upgrade kit for these engines. They said they have one for the Alco PA's. Too bad.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month