Trains.com

Removing cheesy plastic details

1192 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2003
  • 6,434 posts
Removing cheesy plastic details
Posted by FJ and G on Friday, January 14, 2005 12:56 PM
A long-term project of mine is to add wire ladders, catwalks, grab rails, spare MU hoses etc etc etc on locomotives and freight cars that currently have them molded in place.

The question I have is, how do you remove them?

I used a dremel and melted a tank car with it. In feb05 MR, they suggest using a chisel. What about a razor?

Anyone ever try this operation?

I have to leave in one hour, btw, and after that will view this post on Tuesday.
  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Friday, January 14, 2005 1:05 PM
shave off the plastic with a razor knife and hobby file. Touch up with hobby putty and wet sand smooth with sandpaper designed for plastic. When drilling holes for new details, use a hand twist drill. Do not use an electric drill because the heat from friction leaves a gooy hole. Or heat up the metal details and push/melt them in place.
John Long Give me Magnetraction or give me Death.
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Friday, January 14, 2005 1:12 PM
Thanks, John,

For the catwalk, that would be a lot of shaving. What about sand- or emory-paper for that operation?
  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Friday, January 14, 2005 2:40 PM
Dave,

I can't resist. Did you try a cheese grater?

Really - I use a stationary belt sander - taking just a bit at a time to avoid heating the plastic.

Regards,
Roy

Regards, Roy

  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Friday, January 14, 2005 3:22 PM
Dave, I like Roy's suggestion using a belt sander to get the majority of the catwalk off. Maybe Harbor Freight has one with a flat top that you can lay upside down on a table.
John Long Give me Magnetraction or give me Death.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month