Trains.com

2349 Northern Pacific GP9

1868 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2011
  • 31 posts
2349 Northern Pacific GP9
Posted by mikep on Monday, March 27, 2017 9:16 AM

Hello

I just purchased a 2349 in C7 condition.  I read that these shells were reproduced and having silk-screened lettering.  I believe the one I have is original but can anyone help me idenify if it is original.  The chassis appears to be late 1950's but I am concerned about the cab.

Thank You

Mike

  • Member since
    March 2013
  • 563 posts
Posted by BigAl 956 on Monday, March 27, 2017 10:50 AM

A couple of photos would help. Can you post a few?

  • Member since
    August 2011
  • 31 posts
Posted by mikep on Tuesday, March 28, 2017 8:38 AM

Thanks for the reply.  What I found out so far, by searching the internet, is the orignial cab has heat-stamped lettering.  My cab appears to have "BUILT BY LIONEL" heat-stamped on either side.  I cannot tell if the "NORTHERN PACIFIC" or "2349" is heat-stamped or maybe it should not be and only "BUILT BY LIONEL" should be heat-stamped.  This will clear up my issue if someone can comment on this.  I do not think a photo would help since the type of lettering is what needs to be verified.  Other than the lettering, a reproduction would more than likely look the same as the orignial.

  • Member since
    April 2007
  • From: MICH
  • 8,153 posts
Posted by sir james I on Tuesday, March 28, 2017 9:33 AM

From what I found it appears all the lettering should be heat stamped.

"IT's GOOD TO BE THE KING",by Mel Brooks 

  Charter Member- Tardis Train Crew (TTC)   - Detroit3railers-  Detroit Historical society Glancy Modular trains- Charter member BTTS

  • Member since
    February 2009
  • 44 posts
Posted by bridgeengineer on Wednesday, March 29, 2017 12:28 AM

Be very careful with any cleaning.  Mine had the red lightning bolts for the "radio equipped" lettering, rubber stamped instead of heat stamped, and when I ignorantly tried to clean the shell, the lightning bolts wiped right off.

  • Member since
    July 2003
  • 1,786 posts
Posted by cwburfle on Wednesday, March 29, 2017 5:50 AM

Be very careful with any cleaning.  Mine had the red lightning bolts for the "radio equipped" lettering, rubber stamped instead of heat stamped, and when I ignorantly tried to clean the shell, the lightning bolts wiped right off.

Mine 2349 is packed away. As I recall, the red lightning bolts are rubber stamped, just as bridgeengineer wrote.

It certainly is very easy to damage the finish / decorations on Prewar and Postwar Lionel trains. I lost count of the number of pieces I ruined. Be careful.

  • Member since
    August 2011
  • 31 posts
Posted by mikep on Wednesday, March 29, 2017 8:14 AM

Thank you all for the feedback.  I looked alittle closer at the number "2349"  lettering on each side of the cab and one appears to be heat-stamped but the other oh so little (just the way Lionel production was).  I think it is fair to say I have an orignial cab since the "BUILD BY LIONEL" is heat-stamped & maybe the "2349" is heat-stamped.  I can't imagine a reproduction cab having some heat-stamping & some silk-screening.  If it was a reproduction shell, I would expect all lettering to be silk-screened.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month