Hi, I have ben enjoying the special edition of CTT about Lionels Showroom Layouts, but I have a question regarding the painting Bob Sherman did of the huge Lionel Showroom layout.
Does anyone actually have a track plan as opposed to the painting in the magazine?
The painting is kind of hard to use in order to make my version of this famous layout
We don't have one, Chipset35. If we do find one, we'll be sure to run it in the magazine.
Bob Keller
I know that Lionel (and Greenburg) have made track plans based on paintings and the like. Could someone try this with that painting and various photographs of the layouts?
Thanks Bob,
I am making a smaller version of it, and trying to use your photos from the special CTT edition on all those Lionel Showroom layouts.
:)
There are two 1949 showroom layouts, a large on and a small one.
The one I am interested in is the larger one.
I just bought the download of that book from the publisher (Kambach) but I cannot get it to display the pages properly.
So far I do not see it.
:(
Thanks for the heads up!
Yes this is the large one. I bought the book just for that. Can't help ya with the digital downloads tho.
What is the track plan number?
BTW, I used to live in Ft Lauderdale too.
Track plan 63.
Yea I'm still here. Even tho my dad passed away a couple months ago I'll probably be here for another year or so.
ugh, I got ripped off.
The digital copy only goes up to Track Plan 54.
$5+ down the tubes.
I guess I will buy the actual book on AMazon.
Thank You for all your help
Yea I'm not big on these digital downloads. I'd rather have the flesh & blood book in my hands.
I think I bought mine on Amazon.
Balidas, thank you so much for the info, as I received the book today and just like you said, the track plan was there!
Good thing I listened to you, I did not know about the small oval section on the bottom level.
I made a duplicate of the lower outer loop but could not figure out why only a single track was entering and exiting the top level, and now I see why...
No reason to have a duplicate track taking up all that space and expensive track sections if no one can see it.
It is just there for a visual effect of a 2nd train entering and leaving the station...very clever!
I put together the plan for the 1949 showroom layout recreation that was built by the Jackson Society of Model Engineers and, although it is close, the plan in the back of the "Track Plans for Toy Trains" is not completely accurate. It appears to have been drawn from the plan that appeared in the November 1993 issue of Classic Toy Trains magazine.
I came up with what I believe to be a very accurate plan after looking through dozens of photos and books, watching videos and home movies of the original layout, and talking with John van Slyke and several former Lionel employees who worked on the layout. All of my research information is in a three-inch ring binder.
The main difference is that the track on the left end of the layout does not parallel the side of the "table" as shown in the plan.
I may scan my plan and send it to Roger or Bob in case they would like to run it in a future CTT issue.
chipset35 Balidas, thank you so much for the info, as I received the book today and just like you said, the track plan was there! Good thing I listened to you, I did not know about the small oval section on the bottom level. I made a duplicate of the lower outer loop but could not figure out why only a single track was entering and exiting the top level, and now I see why... No reason to have a duplicate track taking up all that space and expensive track sections if no one can see it. It is just there for a visual effect of a 2nd train entering and leaving the station...very clever!
Whether they do or whether they don't, I for one would love to see it!
Trains, trains, wonderful trains. The more you get, the more you toot!
ClintonMagus I put together the plan for the 1949 showroom layout recreation that was built by the Jackson Society of Model Engineers and, although it is close, the plan in the back of the "Track Plans for Toy Trains" is not completely accurate. It appears to have been drawn from the plan that appeared in the November 1993 issue of Classic Toy Trains magazine. I came up with what I believe to be a very accurate plan after looking through dozens of photos and books, watching videos and home movies of the original layout, and talking with John van Slyke and several former Lionel employees who worked on the layout. All of my research information is in a three-inch ring binder. The main difference is that the track on the left end of the layout does not parallel the side of the "table" as shown in the plan. I may scan my plan and send it to Roger or Bob in case they would like to run it in a future CTT issue. chipset35 Balidas, thank you so much for the info, as I received the book today and just like you said, the track plan was there! Good thing I listened to you, I did not know about the small oval section on the bottom level. I made a duplicate of the lower outer loop but could not figure out why only a single track was entering and exiting the top level, and now I see why... No reason to have a duplicate track taking up all that space and expensive track sections if no one can see it. It is just there for a visual effect of a 2nd train entering and leaving the station...very clever! ClintonMagus I put together the plan for the 1949 showroom layout recreation that was built by the Jackson Society of Model Engineers and, although it is close, the plan in the back of the "Track Plans for Toy Trains" is not completely accurate. It appears to have been drawn from the plan that appeared in the November 1993 issue of Classic Toy Trains magazine. I came up with what I believe to be a very accurate plan after looking through dozens of photos and books, watching videos and home movies of the original layout, and talking with John van Slyke and several former Lionel employees who worked on the layout. All of my research information is in a three-inch ring binder. The main difference is that the track on the left end of the layout does not parallel the side of the "table" as shown in the plan. I may scan my plan and send it to Roger or Bob in case they would like to run it in a future CTT issue. chipset35 Balidas, thank you so much for the info, as I received the book today and just like you said, the track plan was there! Good thing I listened to you, I did not know about the small oval section on the bottom level. I made a duplicate of the lower outer loop but could not figure out why only a single track was entering and exiting the top level, and now I see why... No reason to have a duplicate track taking up all that space and expensive track sections if no one can see it. It is just there for a visual effect of a 2nd train entering and leaving the station...very clever! ClintonMagus I put together the plan for the 1949 showroom layout recreation that was built by the Jackson Society of Model Engineers and, although it is close, the plan in the back of the "Track Plans for Toy Trains" is not completely accurate. It appears to have been drawn from the plan that appeared in the November 1993 issue of Classic Toy Trains magazine. I came up with what I believe to be a very accurate plan after looking through dozens of photos and books, watching videos and home movies of the original layout, and talking with John van Slyke and several former Lionel employees who worked on the layout. All of my research information is in a three-inch ring binder. The main difference is that the track on the left end of the layout does not parallel the side of the "table" as shown in the plan. I may scan my plan and send it to Roger or Bob in case they would like to run it in a future CTT issue. chipset35 Balidas, thank you so much for the info, as I received the book today and just like you said, the track plan was there! Good thing I listened to you, I did not know about the small oval section on the bottom level. I made a duplicate of the lower outer loop but could not figure out why only a single track was entering and exiting the top level, and now I see why... No reason to have a duplicate track taking up all that space and expensive track sections if no one can see it. It is just there for a visual effect of a 2nd train entering and leaving the station...very clever! ClintonMagus I put together the plan for the 1949 showroom layout recreation that was built by the Jackson Society of Model Engineers and, although it is close, the plan in the back of the "Track Plans for Toy Trains" is not completely accurate. It appears to have been drawn from the plan that appeared in the November 1993 issue of Classic Toy Trains magazine. I came up with what I believe to be a very accurate plan after looking through dozens of photos and books, watching videos and home movies of the original layout, and talking with John van Slyke and several former Lionel employees who worked on the layout. All of my research information is in a three-inch ring binder. The main difference is that the track on the left end of the layout does not parallel the side of the "table" as shown in the plan. I may scan my plan and send it to Roger or Bob in case they would like to run it in a future CTT issue. chipset35 Balidas, thank you so much for the info, as I received the book today and just like you said, the track plan was there! Good thing I listened to you, I did not know about the small oval section on the bottom level. I made a duplicate of the lower outer loop but could not figure out why only a single track was entering and exiting the top level, and now I see why... No reason to have a duplicate track taking up all that space and expensive track sections if no one can see it. It is just there for a visual effect of a 2nd train entering and leaving the station...very clever!
ClintonMagus I put together the plan for the 1949 showroom layout recreation that was built by the Jackson Society of Model Engineers and, although it is close, the plan in the back of the "Track Plans for Toy Trains" is not completely accurate. It appears to have been drawn from the plan that appeared in the November 1993 issue of Classic Toy Trains magazine. I came up with what I believe to be a very accurate plan after looking through dozens of photos and books, watching videos and home movies of the original layout, and talking with John van Slyke and several former Lionel employees who worked on the layout. All of my research information is in a three-inch ring binder. The main difference is that the track on the left end of the layout does not parallel the side of the "table" as shown in the plan. I may scan my plan and send it to Roger or Bob in case they would like to run it in a future CTT issue. chipset35 Balidas, thank you so much for the info, as I received the book today and just like you said, the track plan was there! Good thing I listened to you, I did not know about the small oval section on the bottom level. I made a duplicate of the lower outer loop but could not figure out why only a single track was entering and exiting the top level, and now I see why... No reason to have a duplicate track taking up all that space and expensive track sections if no one can see it. It is just there for a visual effect of a 2nd train entering and leaving the station...very clever!
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month