Trains.com

Plasticville -- Follow-up

1523 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2006
  • From: Florida
  • 2,238 posts
Plasticville -- Follow-up
Posted by traindaddy1 on Wednesday, November 5, 2014 9:11 AM

Well, we took all the Plasticville off the layout, picked up the green felt, put down the ReadyGrass and are in the process of dusting/cleaning the accessories (wow, didn't realize how much stuff was there).

Question:

A number of the buildings have white plastic that has turned yellowish. Based on your experience, it there anything or any product that you know of that can restore the original white?  

As always, many thanks. 

  • Member since
    April 2007
  • From: MICH
  • 8,153 posts
Posted by sir james I on Wednesday, November 5, 2014 10:00 AM

You could try bleach BUT I HAVE NEVER TRIED IT

If they are the plentiful to find types I just paint them, makes them look new again. And no real value lost.

S.J.

"IT's GOOD TO BE THE KING",by Mel Brooks 

  Charter Member- Tardis Train Crew (TTC)   - Detroit3railers-  Detroit Historical society Glancy Modular trains- Charter member BTTS

  • Member since
    January 2005
  • 1,991 posts
Posted by Frank53 on Wednesday, November 5, 2014 11:26 AM

We recently have undergone a lot of painting/fixing/etc on our home. Mrs 53 became pretty obsessed with the cleanliness of the electric socket plates - also plastic. She soaked them in a shallow plan of bleach and they came out super clean. I doubt the plastic composition is the same, but you might want to try bleach and scrubbing them with a toothbrush. Try the back wall of a common piece first in case the results are less than expected.

  • Member since
    December 2009
  • From: Fort Irwin, CA
  • 33 posts
Posted by Nish on Wednesday, November 5, 2014 2:11 PM
You can try headlight restorer compound, it is a super fine abrasive for plastic with a little bleaching agent in it. Just rub a test area using a clean cloth and a small amount of the polish. I'll test it myself and try posting pics since I already have some.
John
  • Member since
    September 2010
  • From: Parma Heights Ohio
  • 3,442 posts
Posted by Penny Trains on Wednesday, November 5, 2014 7:33 PM

I've had reasonable success with both Windex and Formula 409.  Both of them contain ammonia.

Becky

Trains, trains, wonderful trains.  The more you get, the more you toot!  Big Smile

  • Member since
    January 2006
  • From: Florida
  • 2,238 posts
Posted by traindaddy1 on Wednesday, November 5, 2014 9:21 PM

First of all, thanks for your replies.

We tried soaking the pieces in bleach, Windex, Formula 409 and straight ammonia with no noticeable success.

The consensus around here, considering the cost of replacing the items, is to repaint the pieces, maybe with a glossy white spray paint.  We'll see.  

Anyway, thanks again.

  • Member since
    January 2005
  • 1,991 posts
Posted by Frank53 on Wednesday, November 5, 2014 10:00 PM

I have found the spray cans you buy at Wal-mart are surprisingly good quality paints. In particular - equipment grey primer, flat and gloss black and flat and gloss white. These are large blue spray cans - brand name "Color Place." Steer clear of colors other than these however, as they don't seem to spray all that well. At $1.09 per can, it's a great bargain and no compromise in quality.

  • Member since
    December 2004
  • From: Hobart, In
  • 568 posts
Posted by jwse30 on Thursday, November 6, 2014 6:58 AM

One thing that I have used in the past that helps brighten Plasticville pieces (as well as other plastics and even lithographed tinplate) is Arm and Hammer's Magic Eraser. I guess these also have a bit of an abrasive in (on?) them, so you need to be careful if you are using it on anything that has decals or rubber stamping. But for Plasticville, I fail to see how this could damage anything. They are cheap and readily available at most grocery stores too.

Hope this helps

J White

  • Member since
    January 2006
  • From: Florida
  • 2,238 posts
Posted by traindaddy1 on Friday, November 7, 2014 1:09 PM

We did it and it came out great!

All the yellowed white pieces have been painted.  Our Walmart didn't carry the Color Place spray so we used Rust-oleum Painters Touch gloss white spray instead. Very easy and fast drying.

Thanks for all your advice.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month