Trains.com

Newby Here

2988 views
13 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2014
  • 6 posts
Newby Here
Posted by khook26 on Monday, January 13, 2014 9:37 PM

Just wanted to say Happy New Year All!.

I'm sure you've all heard this story.  I recently had an a son this past April.  For Christmas, I "borrowed" my dad's old post-war o27 lionel set.  I set it up and she still ran.  (After at least 25 years of just sitting in the attic).  I did have to re-wire the whistle tender.  It took a while but when it worked again....it was a really good feeling.  Suffice it to say, I just finished my benchwork....and the train's not going back in the attic.

For all who need prayers, you are in mine.  And thanks to whoever takes the time to read this.

  • Member since
    January 2008
  • From: Duluth, Minnesota
  • 1,967 posts
Posted by Northwoods Flyer on Tuesday, January 14, 2014 6:17 AM

KHOOK26,

Welcome to the forum.  You are correct.  There are many folks here who re-discovered their childhood or family trains and have enjoyed discovering a very satisfying hobby. You will find that there are numerous folks who can help you with answers to questions and give very valuable advice.  Enjoy your time here and don't be a stranger.

Enjoying the World's Greatest Hobby

Northwoods Flyer

The Northwoods Flyer Collection

of

American Flyer Trains

"The Toy For the Boy"

  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Tuesday, January 14, 2014 8:24 AM

Welcome Khook! Now you have to get yourself (uh er your son) a new set and set up a layout for yourself (um him). Big Smile

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Tuesday, January 14, 2014 12:28 PM

Welcome Welcome  Great knowledge here.  Also visit the Coffee Pot and tell us all about yourself.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    June 2002
  • From: Ohio Valley
  • 706 posts
Posted by LL675 on Tuesday, January 14, 2014 4:27 PM

welcome!

Dave

It's a TOY, A child's PLAYTHING!!! (Woody  from Toy Story)

  • Member since
    November 2003
  • From: Sandy Eggo
  • 5,608 posts
Posted by dougdagrump on Tuesday, January 14, 2014 6:08 PM

Welcome to the asylum forum.

Remember the Veterans. Past, present and future.

www.sd3r.org

Proud New Member Of The NRA

  • Member since
    August 2010
  • From: Henrico, VA
  • 8,955 posts
Posted by Firelock76 on Tuesday, January 14, 2014 6:35 PM

Welcome aboard khook!  It didn't take much to awake the sleeping giant, did it?

And thanks for the prayers, that's very noble of you.

  • Member since
    September 2010
  • From: Parma Heights Ohio
  • 3,442 posts
Posted by Penny Trains on Tuesday, January 14, 2014 6:58 PM

Welcome Aboard!

Becky

Trains, trains, wonderful trains.  The more you get, the more you toot!  Big Smile

  • Member since
    July 2009
  • 951 posts
Posted by servoguy on Tuesday, January 14, 2014 7:01 PM

You need to lube the loco and tender and car wheels before you run it.  Also lube the whistle motor.

I recommend ordinary motor oil, as I have 60 years of experience with it.  I use 5W-20 or 10W-30.  Grease, Lionel Lube, WD-40, 3 in 1 oil, light machine oil, etc., all dry out and become hard or gummy.  Motor oil lasts forever.

Recently, I investigated the vapor pressure of motor vs. other lubricants.  Motor oil has a vapor pressure <0.01 mm of Hg (Mercury) at 212 deg F.  For comparison, water has a vapor pressure of 760 mm Hg at 212 F.  Many of the lubricants that have been recommended on the forums do not have published vapor pressures.  This Lucas Red and Tacky and LaBelle products, so I cannot recommend them.  Lithium grease has a vapor pressure more than 100 times higher than motor oil, and so I cannot recommend it.  I have a 2025 loco that was lubed with motor oil in 1965.  When I took it out of the box about 5 years ago, it ran just fine and did not need to be lubed again.  I have bought two locos that had lithium grease in them that was hard.  I had to dig the dried grease out and I lubed them with motor oil, and they are still running fine.  This was about 5 years ago.

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Tuesday, January 14, 2014 8:22 PM
Welcome. There are a bunch of good folks here. Good resources for troubleshooting - chances are somebody has already fixed whatever problem you run across. Ask away, and don't be a stranger.
  • Member since
    March 2012
  • 291 posts
Posted by Dave632 on Wednesday, January 15, 2014 6:50 PM

 Welcome.

Yes, I put up my old trains back about 8 years ago when my first grandson was born. They had sat stored for about 20 years from when I last ran them with my sons. It has grown by leaps and bounds. My grandsons do come over and run them but the big kid is the main operator.

  • Member since
    January 2014
  • 6 posts
Posted by khook26 on Monday, February 17, 2014 5:15 PM

Thanks for all the messages everyone.

  • Member since
    December 2004
  • 276 posts
Posted by David Barker on Monday, March 10, 2014 5:15 PM
Welcome!

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month