I have purchased an old used 362 barrel loader. I have reworked the barrel car and it works just fine. I need some help in figuring how to wire the 362 barrel loader into my TMCC layout. I have common to both outside rails and 17 volts to center rail. Should I connect it though an SC-1 or SC-2? It didn't have a controller wire with it.
Paul
I don't know anything about TMCC. Seventeen volts is very high for a barrel loader.
quizshow904 I have purchased an old used 362 barrel loader. I have reworked the barrel car and it works just fine. I need some help in figuring how to wire the 362 barrel loader into my TMCC layout. I have common to both outside rails and 17 volts to center rail. Should I connect it though an SC-1 or SC-2? It didn't have a controller wire with it. Paul Paul, I've had several 362s on my bench, and 10-12 volts seems to be the ideal range for a 362 in proper adjustment. Make sure the air gap between the coil and plate on the ramp is set to 1/32" per Lionel's factory spec.
Paul,
I've had several 362s on my bench, and 10-12 volts seems to be the ideal range for a 362 in proper adjustment. Make sure the air gap between the coil and plate on the ramp is set to 1/32" per Lionel's factory spec.
Jim
cwburfle I don't know anything about TMCC. Seventeen volts is very high for a barrel loader.
Very high indeed. I'd connect it to a variable power supply. In fact, that's what I do.
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month