Trains.com

Scotch-Brite "101" ?

4370 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2006
  • From: Florida
  • 2,238 posts
Scotch-Brite "101" ?
Posted by traindaddy1 on Wednesday, September 22, 2010 3:28 PM

Fast question: After re-reading posts on cleaning tubular track, I've decided to try Scotch-Brite.  Went to the super market this afternoon.....Is  "SCOTCH-BRITE, Never Rust Wool Soap Pads"  the correct product?    As always, many thanks.

 

  • Member since
    April 2005
  • From: South Carolina
  • 9,713 posts
Posted by rtraincollector on Wednesday, September 22, 2010 3:59 PM

not exactly the type you want don't have soap in them I know usually places like lowes, home depot should have them as I use to get them from my boss that also owned a welding supply store there usually green pads about 5" x 9" but have gotten them in a brownish color

Life's hard, even harder if your stupid  John Wayne

http://rtssite.shutterfly.com/

  • Member since
    September 2003
  • 218 posts
Posted by Boxcar Bill on Wednesday, September 22, 2010 4:23 PM

Go to your local NAPA store. They should have it in different grades.Big Smile

 

Bill

Factory Trained Lionel Service Tech.
  • Member since
    January 2006
  • From: Florida
  • 2,238 posts
Posted by traindaddy1 on Wednesday, September 22, 2010 8:52 PM

Hey Guys:    THANKS SO MUCH.     Glad I asked.

  • Member since
    April 2008
  • From: Ft. Lauderdale, Fla.
  • 682 posts
Posted by balidas on Wednesday, September 22, 2010 10:29 PM

Scotchbrite claening pads is a brand name. They are green or red and I think blue. They have no soap. You can get them in any supermarket and Walmart.

  • Member since
    November 2007
  • From: Central Pennsylvania
  • 149 posts
Posted by LocoPops on Thursday, September 23, 2010 11:51 AM

I was of thinking of using these for a track-cleaning car.  I've heard of others doing this.  I was a little concerned about their abrasiveness.  Will they wear down the rails?

Pops
  • Member since
    March 2009
  • 492 posts
Posted by arkady on Thursday, September 23, 2010 12:13 PM

LocoPops

I was of thinking of using these for a track-cleaning car.  I've heard of others doing this.  I was a little concerned about their abrasiveness.  Will they wear down the rails?

Not unless the track-cleaning car is a part of every single consist.

 

  • Member since
    November 2007
  • From: Central Pennsylvania
  • 149 posts
Posted by LocoPops on Thursday, September 23, 2010 2:37 PM

arkady

 

 LocoPops:

 

I was of thinking of using these for a track-cleaning car.  I've heard of others doing this.  I was a little concerned about their abrasiveness.  Will they wear down the rails?

 

Not unless the track-cleaning car is a part of every single consist.

 

No, I'd be just running around the tracks a couple of times when needed.

Pops
  • Member since
    July 2006
  • 1,340 posts
Posted by Seayakbill on Thursday, September 23, 2010 3:24 PM

I use the green scotch-brite pads to clean the track, does a alright job.

Bill T.

  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Thursday, September 23, 2010 4:08 PM

Here's a look at the flat I made with scotchbrite-brand pads.

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    August 2005
  • From: Florida
  • 409 posts
Posted by otftch on Friday, September 24, 2010 7:48 AM

I use the North East Trains track cleaning car with one green scotchbrite pad. I've been using it on my layout for about three years with no noticable wear on the rails,I have not used any liquid in this time and have had no problems with dirty track. If i notice a horn going off when not activated out comes the cleaner for a couple of revolutions. I do run it in front of the locomotive.

                            Ed

"Thou must maintaineth thy airspeed lest the ground reach up and smite thee."
  • Member since
    November 2007
  • From: Central Pennsylvania
  • 149 posts
Posted by LocoPops on Monday, September 27, 2010 7:22 AM

I got some scotch-brite pads and was looking for an old car to convert to a track-cleaning car, like some of you all have done.  I remembered an old Marx track-cleaning car that my father bought in the 50's.  It hasn't been used in years.  It had two felt pads which didn't do much good.  So I took out the felt pads and replaced them with a strip of scotch-brite.  It works terrific.   I can't believe this violation of Murphy's Law, which is what normally rules my activities!   Here are a couple pictures...

 

 

Pops
  • Member since
    November 2006
  • From: Rhode Island
  • 334 posts
Posted by hscsltb on Thursday, September 30, 2010 9:35 PM

Im not sure but I think the different colors indicate how course the pad is.

Harold Brown

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month