Trains.com

Least modeled railroads: but why not?

1704 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2003
  • 6,434 posts
Least modeled railroads: but why not?
Posted by FJ and G on Friday, April 9, 2004 2:44 PM
Besides obscure sugar cane and sewage tunnel railroads, which railroads have NEVER or RARELY been modeled by the good folks of 3-rails like you and me; and, furthermore, WHY? (incidentally, I have my final basement inspection by the county on Monday so I'll see you all on Tuesday).

1. DC metro: why? 1. No models exist in 3 rails and 2. they are rather mundane (possibly ugly?) with a two-tone mud-brown and dull silver. Positives: the DC metro carries millions of people a year and has some spectacular trackage, both above and under the ground, and even along the inside the Highway 66 for 7 or 8 miles, going 60-70 mph while traffic on both sides is at a standstill.

2. Panama Canal RR (not the KCS affiliate). why? 1. no models exist in any scale, and 2. They are electric donkeys. Positives: would look rather cool having these donkeys pulling an ocean liner thru the canal. Pound for pound, these are the world's most powerful locomotives.

3. Pikes Peak or Mt Washington Cog. why? 1. no models in 3 rails exist, despite them being 3 rail railroads. Positives: these would be a dramatic floor-to-ceiling layout if you have a 12-ft high ceiling (my ceiling is about 20 feet in the family room).

4. Yakima Electric. Why? 1. I don't believe that these models exist in 3 rails and 2. Involves stringing a lot of wire. Positives: I think the line is pretty cool and you could have a UP connecting line.

5. Narrow gauge railroads. Why? 1. No 3-rail models exist. As a matter of fact, I believe that the longest regularly scheduled run of a steeam loco tourist line is the Chama-Antonita line. Correct me if I'm wrong but Shays and Climaxes produced by MTH and I believe K-Line(?) are standard-gauged. At one time, thousands of narrow gauge lines existed.

6. New York City's new Air-Train that connects JFK with subways and Long Island RR. It's some 14 miles long, with about 2/3 of it on an elevated concrete structure. Why? 1. no models exist; and 2. it doesn't look like a New York Subway.

7. Fill in the blank for your own pick____________________.

dave vergun

Have a nice weekend!

  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Friday, April 9, 2004 5:12 PM
How about something as simple as the Alaska railroad. Lionel has made a number of pieces with these markings, but I have heard of anyone modeling the Alaska Railroad. It has some wondreful scenery, I've been there.
  • Member since
    March 2004
  • 1,774 posts
Posted by Dr. John on Friday, April 9, 2004 6:32 PM
How about the Chicago Great Western? I'm not aware of anyone producing any of their engines or rolling stock. Their F-3s were beautiful!
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Friday, April 9, 2004 6:43 PM
How about Canadian [Canadien] National? When I was doing the engines and rolling stock in the 80's, nothing in NC but a GP7 [or 9 if you added blisters] and a box car. I had to order my decals [which had to be custom as no one did them as a standard offering], paint my engines [orange noses and white striped sides] and decal and paint my rolling stock. Going to Mom's Sunday. Might just bring some back and photo them for you all. Got to check my walk in attic as a couple of boxes in there too. Now I will convert them to NS.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    July 2002
  • From: A State of Humidity
  • 2,441 posts
Posted by wallyworld on Friday, April 9, 2004 6:51 PM
Illinois Terminal gets my vote. It ran heavy electric interurban freight, and sleeper service on intercity passenger trains complete with open observation cars into the 1940's. It also ran steam at the same time and survived up until the 1980's under diesel power with Alco and EMD power until absorbed by N&W.
Now thats variety..

Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has.

  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Friday, April 9, 2004 7:00 PM
Ok, East Carolina Railroad. It even has a historical society. Does not exist anymore. Has a big following. Only ran from Farmville, NC [by the way of Fountain, Macclesfield, Pinetops, Tarboro, Conetoe, Bethel, Willaimston] to Plymouth NC. Now if you can pronounce Conetoe correctly, you are from Eastern NC. It is NOT Cone toe. Indian name.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Friday, April 9, 2004 7:51 PM
This is pretty interesting to think about...CGW has a (relatively) famous layout in N scale that's been featured in MR by Mike Skibbe (sp)

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, April 9, 2004 9:26 PM
Has anybody ever modelled the Washington, Baltimore & Annapolis? It was once one of the best electric railroads in existence. It hauled freight and passengers it was high speed (even by today's standards) and had many different kinds of locos and rolling stock. Also how about the old DC Transit street car system. It was before the DC Metro and also had interurban rail branches and had a freight line to the PEPCO plant in SE Washington DC that was served by two heavy electric locos. They also had some street cars converted for freight use and special tasks.
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Friday, April 9, 2004 9:38 PM
Ok, no one can speak Eastern NC indian. Conetoe is pronounced:
Co knee ta.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    December 2001
  • From: Chicagoland
  • 465 posts
Posted by cbq9911a on Friday, April 9, 2004 9:44 PM
Least Modeled Railroads . . .
. . .with a signifcant fan base: Chicago North Shore & Milwaukee.
(Because everything North Shore is brass.)
. . .with a significant impact on its area: Metra (Chicago commuter rail).
(Because it has boring paint schemes and operations.)
. . .with a lot of track: Chicago Great Western
(Because it had such a low profile.)
. . .of a particular genre: Railroad Museums
(How do you model a museum operation???)

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month