Trains.com

seeking basic info on wiring O27 standard switches

906 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
seeking basic info on wiring O27 standard switches
Posted by Anonymous on Wednesday, October 11, 2006 5:01 AM
Hi,
SO I'm just starting out with my inherited set of Lionels.  I have put together a track that is pretty cool and uses two switches in a "bone" configuration (loops at each end with a single peice of track connecting).

I am noticing that the switches are humming loudly and I'm pretty sure I did something wrong!  (the train is going though.)

Also, I remember that not ALL the connectors between tracks are supposed to be metal when connecting the switches.  How does this work?  I have no reference info whatsoever. 

And another thing: there are wiring posts on my switches... is it possible to hook the switches up to automatically switch when the train is approaching from a given direction? ...Without getting too elaborate?

Thanks!
newbie
  • Member since
    January 2003
  • From: Mexico
  • 2,629 posts
Posted by egmurphy on Wednesday, October 11, 2006 5:51 AM

You'll get a better response if you post the question over on the "Classic Toy Trains" forum.  I know it's a bit confusing that Trains has two forums with similar names, but this one is for real trains.  The "Classic Toy Trains" forum specializes in the stuff you are interested in.

You can get to that forum using the 'forums' button at the top of the page or try:
http://www.trains.com/trccs/forums/95/ShowForum.aspx

Good luck,

Ed

The Rail Images Page of Ed Murphy "If you reject the food, ignore the customs, fear the religion and avoid the people, you might better stay home." - James Michener
  • Member since
    January 2001
  • From: Guelph, Ont.
  • 1,476 posts
Posted by BR60103 on Thursday, October 12, 2006 11:18 PM

very quickly: I think the rails from the frog (the short ones) are used to run the non-derailing feature. However, they have to be insulated from the rest of the track with a plastic pin (Lionel calls them FIBER PINS). The hum is because the switch is constantly trying to turn both directions at once.

Take all the rails off of the end of the switches. mow turn the track power on and use a short piece of wire to touch the outer rails at the end of the switches. This should cause the switch to change. Now you have to put the insulated pins in those rails.

--David

SUBSCRIBER & MEMBER LOGIN

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

FREE NEWSLETTER SIGNUP

Get the Classic Trains twice-monthly newsletter