Spring 1948 visit to Coney Island Yards

1313 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June, 2002
  • 14,192 posts
Spring 1948 visit to Coney Island Yards
Posted by daveklepper on Wednesday, October 25, 2017 8:39 AM

Weed control train, covered Brighton and Sea Beach plus Nortons Point trolley:

Newly arrived R10s to be setup to run under own power to 207th shops and yard via Ditmas connecting track to Church Avenue

Steel Stenways and "Words Fair (1939) IRT cars and then BMT Q-types, all from Flushing and Astoria lines in for overhaul

War-surplus diesel:

  • Member since
    January, 2010
  • 273 posts
Posted by seppburgh2 on Wednesday, October 25, 2017 9:56 PM

Thanks for sharing!

  • Member since
    June, 2002
  • 14,192 posts
Posted by daveklepper on Sunday, January 21, 2018 5:34 AM

Some proof that yes, indeed, the New York City Transit Authority did, at one time, provide common-carrier freight service.  The team track located near Coney Island Shops:

  • Member since
    August, 2010
  • From: Henrico, VA
  • 8,725 posts
Posted by Firelock76 on Monday, January 22, 2018 8:52 AM

It doesn't surprise me the Transit Authority provided some freight service where practicable.  Money is money after all.

  • Member since
    January, 2010
  • 273 posts
Posted by seppburgh2 on Tuesday, January 30, 2018 1:28 PM
Thanks for sharing the photo of # 8. A locomotive in its native setting!
  • Member since
    June, 2002
  • 14,192 posts
Posted by daveklepper on Monday, October 22, 2018 3:11 AM

Some Coney Island shop photos from the Autumn 1947 visit via the Willeta Point - C. I. non-revenue move, photos of that move on its own thead. Plus one from the 1948 visit.

The one-of-a-king experimental steel elevated car for Brooklyn United Rys., before the dual contracts.  At that time the four routes to Coney Island had surface operation with low platforms, so this car had steps and traps.  So did the wood and composite BMT open-platform el cars, but they were modified.

Here is the Shop Switcher

A D-type in for repair

A wood gate car with the gravity third-rail shoe visible.  Does CTA use a similar shoe today?

  • Member since
    May, 2012
  • 3,456 posts
Posted by rcdrye on Monday, October 22, 2018 6:51 AM

CTA still uses the gravity shoe.  There were some cars in the 6000 series that were equipped with the spring "paddle" shoe as delivered in the late 1950s, but CTA quickly reverted to the gravity shoe.

  • Member since
    January, 2002
  • 3,520 posts
Posted by M636C on Monday, October 22, 2018 7:05 AM

These were Whitcombs.

They were first used in North Africa where the standard USA profile cab was usable. It was realised that they would have to be used in Italy, and the cab was cut down to the profile illustrated, and further locomotives were built to the low clearances. Quite a few were taken over by the Italian State Railways, and eventually re-engined with Italian diesel engines.

Peter

 

  • Member since
    September, 2003
  • 6,210 posts
Posted by Overmod on Monday, October 22, 2018 11:31 AM

Peter, weren't the cabs on the Italian Whitcombs 'cut down' even more than this, with angled walls above the beltline almost matching the side angle of the hoods?  Much the same approach as the MRS-1s, if I remember right.

SUBSCRIBER & MEMBER LOGIN

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

FREE NEWSLETTER SIGNUP

Get the Classic Trains twice-monthly newsletter