On the four tracks between Mott Haven Junction and Grand Central Terminal, there are two sets of signals, one for each direction, on each of the four tracks. In the cut, on the embankment, and one the elevated structure, they are located on signal bridges because of the close track spacing. In the tunnels (in general, three tunnels, one double-track in the center, and one single-track on each side) they are conventional vertical signals bracketed off tunnel walls except for those between the two center tracks, which are on stands. They are all color-light signals, mostly two displays, some three displays leading to switches ("turnouts") or advance signals for such signals. In the throat trackage on both levels there are dwarf signals with only one indication, and in many cases this is either yellow or red, with no green. When last seen, the dwarf signals used movable color screens behind a fixed lens, but something more modern may be use today.
Also, Metro North is in the process of generally replacing all wayside signals with cab signals and automatic speed and train control protection, not replacing the engineer, but taking control if the engineer exceeds restrictions. I am uncertain whether this replacement has progressed to this most vital four-track section, which was intended to be the last step in the electrified zone. In the areas where the replacement has occured, the only wayside signals are lunar white before switches (turnouts) which simply indicate that everything is working properly and the cab signals can be assumed to show correctly conditions ahead and the locked position of the switch or switches.
I believe all switches are now controlled from a dispatcher's CTC panel at GCT. But around 106th Street, on the embankment, there was a tower, unique in that in only controlled switches between the four tracks with no diverging route away from the embankment. This tower bridged the four tracks like a huge signal bridge. I wonder if it still there.
The south end of either of the two 125th Station platforms is a great place to photograph passenger trains. A great variety of equipment and a wonderful skyscraper background.
Reversible signaling means that there are signals on each track facing both directions, to GCT and away from GCT, or north and south The signals did not actually move. They were/are mounted back to back, one signal facing 180 degrees from the other.
In that era most multiple main track was signaled for only one direction, usually the right hand track on double track. On multiple main tracks each track was assigned a "current of traffic." And is was common that the track had signals facing only for that direction. There is still some of this sort of signaling around. BNSF between Minneapolis and Fargo has several stretches of double track signaled for only one direction, the normal current of traffic. UP has the same west of Omaha to Gibbon, NE, and there are some others.
Back in 1950 multiple track signaled in only one direction was the norm. GCT's four tracks which had signals facing both directions was exceptional. Today, almost 60 years later, most multiple main tracks are CTC controlled and have signals facing both directions. But this was unusual in 1950.
RIDEWITHMEHENRY is the name for our almost monthly day of riding trains and transit in either the NYCity or Philadelphia areas including all commuter lines, Amtrak, subways, light rail and trolleys, bus and ferries when warranted. No fees, just let us know you want to join the ride and pay your fares. Ask to be on our email list or find us on FB as RIDEWITHMEHENRY (all caps) to get descriptions of each outing.
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Get the Classic Trains twice-monthly newsletter