Product Review Please--Spectrum 0-6-0 Saddle Tank Switcher.

SpaceMouse

Member since
December 2004
From: Rimrock, Arizona
11,251 posts

Posted by SpaceMouse on Thursday, April 21, 2005 2:22 PM

I'm going to need several switchers on my layout--at least 4 or 5. Right now I have an IHC 0-4-0 that I have to kitba***o make work-and it is a passible runner. I have 2 MDC kit 0-6-0 unbuilt which I know I can convert to DCC. But that is it for what I can use that fit the 1890's.

But the biggest regret I have for picking the 1890's as an era is that I can't use my S1 switcher which is my favorite loco for running. And I am planning a switching intensive layout.

So in case I freak-out and go to a 1920's layout. How do the Spectrum 0-6-0's run. Am I going to be happy with their smoothness of operation or am I going to suddenly freak out one day, put my steamers and saloon's and sherrif's offices in a box and build a Pennyslvania Oak Forest/ Coal mine so I can run my PRR switcher and Broadway stuff.

Chip

Building the Rock Ridge Railroad with the slowest construction crew west of the Pecos.

Reply

tstage

Moderator

Member since
June 2003
From: Northeast OH
17,247 posts

Posted by tstage on Thursday, April 21, 2005 2:26 PM

Chip,

I can't speak from personal experience but I've heard good things about the Bachmann 0-6-0. The only downside that I've heard is, because of the short wheel base, you might have some problems with hesitation/interupted power over crossings.

Tom

https://tstage9.wixsite.com/nyc-modeling

Time...It marches on...without ever turning around to see if anyone is even keeping in step.

Reply

selector

Member since
February 2005
From: Vancouver Island, BC
23,330 posts

Posted by selector on Thursday, April 21, 2005 2:53 PM

I have found that with the P2K also, Tom, now that you mention it. I don't believe that it has a flywheel because when it does stop, it is on a turnout, and it stops right now. So, the short wheelbase does cause some problems, and if Chip intends to do a lot of switching (= lots of turnouts), well....

Reply

Anonymous

Member since
April 2003
305,205 posts

Posted by Anonymous on Thursday, April 21, 2005 3:03 PM

Take a look at MR Nov 2002 for the LL 0-6-0.

Reply
Edit

Anonymous

Member since
April 2003
305,205 posts

Posted by Anonymous on Thursday, April 21, 2005 3:31 PM

The LL 0-6-0 is a pretty engine, but wont pull half that its older brother the 0-8-0 does.

Reply
Edit

scole100

Member since
January 2001
From: US
131 posts

Posted by scole100 on Thursday, April 21, 2005 6:26 PM

I have one on my layout and it runs very smoothly and can go SLOW. I had Tony's install a DCC decoder in it and It has been a very smooth running engine. The downside is it is very light, and very short. This means that dirty track or insulfrog turnouts will stop it dead in it's tracks. Also, it has limited pulling power, especially on any type of a grade.

Reply

Anonymous

Member since
April 2003
305,205 posts

Posted by Anonymous on Thursday, April 21, 2005 7:47 PM

Its a great little engine. runs smooth as anything. Doesnt pull much but then again a switcher shouldnt have to. Its a little hairy converting it to DCC, but a decoder will make it run even smoother. Just a tip: Check Ebay. I picked mine up for less than $30

Reply
Edit

robengland

Member since
February 2003
From: New Zealand
462 posts

Posted by robengland on Thursday, April 21, 2005 7:56 PM

agree all of that. Runs OK, but very vulnerable to poor contact. Tends to wobble about a bit too unless track is silky smooth. Nicely detailed so long as you don't peer into the cab. A beggar to fit a decoder into it (I used a DZ123). Forget sound [:)] Mechanism growls a bit. But cute.

Rob Proud owner of the

a website sharing my model railroading experiences, ideas and resources.

Reply

Anonymous

Member since
April 2003
305,205 posts

Posted by Anonymous on Thursday, April 21, 2005 10:29 PM

Frogs on Atlas turnouts are a little high. Rigid frame steam switchers tend to stop at this point unless moving unprototypical quick.This can be corrected with a 6" double cut or 6" mill ***. File until frog is same height as adjoining rail. Go to local gun shop to get Birchwood Casey cold blue if you don't like the color of the refiled frog.
Or
get turnouts with powered frogs.

Reply
Edit

Anonymous

Member since
April 2003
305,205 posts

Posted by Anonymous on Saturday, April 23, 2005 5:58 PM

I am posting a new thread regarding Atlas Switches and their Frogs, Mstein, Please respond with more detail on what you did with your frogs!! and I am also in the hunt for an 0-6-0 that runs well over frogs, I need them to do SWITCHING only!

Reply
Edit

Anonymous

Member since
April 2003
305,205 posts

Posted by Anonymous on Monday, April 25, 2005 1:53 PM

Hi There,

I have just purchased one from the states - got it for a very good price (compared to the UK) and it runs like a treat - again not too great on haulage, but it does what I need it to do - hauls 10 athearn box cars on the flat but could possibly do with a bit more weight, so will add some lead shot at some point!

Regards,

Stephen.

Reply
Edit

Subscriber & Member Login

Subscriber & Member Login

Users Online

Search the Community

Subscriber & Member Login

Product Review Please--Spectrum 0-6-0 Saddle Tank Switcher.

Subscriber & Member Login

Users Online

Search the Community

Model Railroader Newsletter